Frequently Asked Questions
-
9
89520
Frequently Asked Questions
Replies
J
Jeanette
Sep 24, 2024
Can Beam Micro Boost Complete Mineral Supplements be used in place of salt for the ic to bind to?
Like
Liked
Reply
1
1 reply
Hide branch
P
Pin
Sep 15, 2024
The glass of water need to have the diameter maximum of the glow pad or I can use a bigger bowl, for example 20cm diameter, to imprint?always beeing within the 2l, thanks
Like
Liked
Reply
1
1 reply
Hide branch
P
Pin
Sep 15, 2024
I followed the procedure to disable the bluetooth on glowpad but it doesn t work, led blink red bu when I restart the device I can see it available, tried many times...
Like
Liked
Reply
1
1 reply
Hide branch
JO
Jameson O'Connor
Sep 10, 2024
What happens if you get an alert, a phone call, etc, while the device is plugged in? I noticed the IC pad lighting up. Does that ruin the imprint?
Like
Liked
Reply
1
1 reply
Hide branch
TS
Thomas Stagat
Sep 09, 2024
Hallo Anton, alles zurรผck. Mein eigener Fehler. Die Lautstรคrke war nicht korrekt eingestellt. Also alles gut
Hello Anton, everything is back. My own mistake. The volume was not set correctly. So everything is fine
Like
Liked
Reply
1
1 reply
Hide branch
TS
Thomas Stagat
Sep 09, 2024
Hallo Anton, ich nutze das ICPad 3. Mir fรคllt jedoch heute auf, das eine ganze Reihe PEMFs plรถtzlich nicht mehr leuchten. Das sind alles PEMFs die vorher immer rot und blau geleuchtet haben. Das Pad ist wahrscheinlich NICHT. defekt, denn andere PEMFs leuchten nach wie vor. Woran liegt diese plรถtzliche Verรคnderung? Die PEMFs die nicht mehr leuchten habe ich zum Teil selbst erstellt andere habe ich aus de Library. Danke fรผr dein... See more
Hallo Anton, ich nutze das ICPad 3. Mir fรคllt jedoch heute auf, das eine ganze Reihe PEMFยดs plรถtzlich nicht mehr leuchten. Das sind alles PEMFยดs die vorher immer rot und blau geleuchtet haben. Das Pad ist wahrscheinlich NICHT. defekt, denn andere PEMFยดs leuchten nach wie vor. Woran liegt diese plรถtzliche Verรคnderung? Die PEMFยดs die nicht mehr leuchten habe ich zum Teil selbst erstellt andere habe ich aus de Library. Danke fรผr dein Feedback
Hello Anton, I use the ICPad 3. However, today I noticed that a whole series of PEMFs suddenly stopped lighting up. These are all PEMFs that previously always lit up red and blue. The pad is probably NOT defective, because other PEMFs are still lighting up. What is causing this sudden change? I created some of the PEMFs that no longer light up myself, others I got from the library. Thank you for your feedback
Hello Anton, I use the ICPad 3. However, today I noticed that a whole series of PEMFs suddenly stopped lighting up. These are all PEMFs that previously always lit up red and blue. The pad is probably NOT defective, because other PEMFs are still lighting up. What is causing this sudden change? I created some of the PEMFs that no longer light up myself, others I got from the library. Thank you for your feedback
Like
Liked
Reply
1
1 reply
Hide branch
M
Maria
Sep 07, 2024
Hello, my glowing ic pad 3 is not being recognized by my iPhone for Bluetooth. It used to work and now my phone isn't detecting the glowing pad. How can I troubleshoot this? Thank you.
Like
Liked
Reply
0
1 reply
Hide branch
KC
Kelly Cabral
Sep 04, 2024
Hi! How can I get a pharmaceutical added to the IC list? My husband was given Tamisulosin (FloMax) to assist in passing a kidney stone. The med is affecting him badly with low blood pressure and dizziness. Would like to find an IC that would help with the stones.
Like
Liked
Reply
2
1 reply
Hide branch
Pf
Pat forrester
Sep 04, 2024
Hi Anton, this site is amazing . But I am having trouble pulling up the parasite cancer cell killer rife complex. I have tried relogging in and it still won't show, any ideas please.
Like
Liked
Reply
2
1 reply
Hide branch
M
Marie-Jo
Sep 02, 2024
bonjour est-ce possible d'avoir la frรฉquence ou la masse molaire de l'Hรฉricium Erinaceus ? Merci beaucoup et cordiales salutations
Hello, is it possible to have the frequency or molar mass of Hericium Erinaceus? Thank you very much and cordial greetings
Like
Liked
Reply
0
1 reply
Hide branch
Jia Yang Li Borchsenius
Aug 21, 2024
You say shake the bottle for 10 seconds before imprinting, but I always do vortex water for 10 minutes using either a vortex jug, or a double vortex pipe to structure water before drinking it. In my case, is it necessary to shake the bottle for 10 second before imprinting?
Like
Liked
Reply
1
1 reply
Hide branch
DB
D.D. Black
Aug 19, 2024
One more question about the IC Glow... Does this device store the IC's? So, we can transfer the IC to the device and then utilize it when/wherever we need to - even if we are not connected to the internet? If so, is there a certain number it can store? And, while I am asking about this, can you also tell me if the Circuit IC Pad's also store IC's? Or does that device always need direct connection to the internet in order to work?
One more question about the IC Glow... Does this device store the IC's? So, we can transfer the IC to the device and then utilize it when/wherever we need to - even if we are not connected to the internet? If so, is there a certain number it can store? And, while I am asking about this, can you also tell me if the Circuit IC Pad's also store IC's? Or does that device always need direct connection to the internet in order to work?
Like
Liked
Reply
1
1 reply
Hide branch
Load more comments...
Please select language
Select