Hello, I got my machine and love it! However, the cable fell on the floor and my pet rabbits chewed it. Can I buy any stereo cable to replace it or is this something special?
Bonjour, j'ai ma machine et je l'adore! Cependant, le câble est tombé sur le sol et mes lapins de compagnie l'ont mâché. Puis-je acheter un câble stéréo pour le remplacer ou est-ce quelque chose de spécial?
Guten Tag,habe eine Mitgliedschaft abgeschlossen um komplett alles zu verwenden mit dem Leucht ic pad.Hab es einmal ausprobiert und es funktionierte.Dann ausgeloggt,wieder neu eingeloggt.Jetzt hab ich keine Zugriff mehr auf die ic's. Sagt nur mit Premium Mitgliedschaft möglich,obwohl ich die schon abgeschlossen habe mit Kartendaten. Bitte um Hilfe.LG Jörg
Guten Tag,habe eine Mitgliedschaft abgeschlossen um komplett alles zu verwenden mit dem Leucht ic pad.Hab es einmal ausprobiert und es funktionierte.Dann ausgeloggt,wieder neu eingeloggt.Jetzt hab ich keine Zugriff mehr auf die ic's. Sagt nur mit Premium Mitgliedschaft möglich,obwohl ich die schon abgeschlossen habe mit Kartendaten. Bitte um Hilfe.LG Jörg
Bonjour, je me suis abonné pour pouvoir tout utiliser avec le pad ic Leucht. Je l'ai essayé une fois et cela a fonctionné. Puis déconnecté, reconnecté. Maintenant je n'ai plus accès aux ic's. Dit uniquement possible avec un abonnement premium, bien que je me sois déjà inscrit avec les détails de la carte. S'il vous plaît aider. LG Jörg
Hey there, I‘ve tried to create a new complex twice, but ist was not possible to save the data. System told me: something went wrong. So what can I do? Thx for help! Jenny
Hé là, j'ai essayé de créer un nouveau complexe deux fois, mais il n'a pas été possible de sauvegarder les données. Le système m'a dit: quelque chose s'est mal passé. Alors qu'est-ce que je peux faire? Merci pour l'aide! Jenny
Hi! The lights of my glowing IC Pad are shining without any reason (no PEMF Transfer, no cable connected). It stops after hours with empty battery. When I charge it with the USB cable the lights are shining again. When I start a transfer, it shines brighter. Can I "reboot" it?
Salut! Les lumières de mon IC Pad brillant brillent sans raison (pas de transfert PEMF, pas de câble connecté). Il s'arrête après des heures avec une batterie vide. Lorsque je le charge avec le câble USB, les lumières brillent à nouveau. Quand je commence un transfert, il brille plus fort. Puis-je le «redémarrer»?
Eventually I've got a Hummer!!!! I've been satisfied with it until now except the sound it makes while working. the loudness of the sound depends on each IC. It's very convenient since I can get PEMF or audible ICs while finishing my routine work. Most of all, when I use an ic pad sometimes the connect has problems. Besides they(cell phone snd ic pad) are heavy but Hummer is light and no problems with the connect as lona as I move too far from... Voir plus
Eventually I've got a Hummer!!!!
I've been satisfied with it until now except the sound it makes while working.
the loudness of the sound depends on each IC. It's very convenient since I can get PEMF or audible
ICs while finishing my routine work.
Most of all, when I use an ic pad sometimes the connect has problems. Besides they(cell phone snd ic pad) are heavy but Hummer is light and no problems with the connect as lona as I move too far from the bluetooth area.
I have some questions. Hummer has some parts. One of them, a coin shaped patch! What is it for? Is it supposed to be patched to the bottom of Hummer?
Even though I put the hummer on the cotton shirt, some ICS make the hummer pretty hot to touch while working. Is it okay?
Finalement, j'ai un Hummer !!!! J'en ai été satisfait jusqu'à présent, sauf le son qu'il produit en travaillant. le volume du son dépend de chaque IC. C'est très pratique car je peux obtenir des PEMF ou des ICs audibles tout en terminant mon travail de routine. Surtout, lorsque j'utilise un pad ic, la connexion a parfois des problèmes. En plus, ils (téléphone portable et pad ic) sont lourds mais Hummer est léger et aucun problème avec la... Voir plus
Finalement, j'ai un Hummer !!!! J'en ai été satisfait jusqu'à présent, sauf le son qu'il produit en travaillant. le volume du son dépend de chaque IC. C'est très pratique car je peux obtenir des PEMF ou des ICs audibles tout en terminant mon travail de routine. Surtout, lorsque j'utilise un pad ic, la connexion a parfois des problèmes. En plus, ils (téléphone portable et pad ic) sont lourds mais Hummer est léger et aucun problème avec la connexion car je m'éloigne trop de la zone bluetooth. J'ai quelques questions. Hummer a quelques pièces. L'un d'eux, un patch en forme de pièce! Pourquoi est-ce? Est-il censé être patché au bas de Hummer? Même si j'ai mis le hummer sur la chemise en coton, certains ICS rendent le hummer assez chaud au toucher pendant le travail. C'est OK?
Hey, today we received our Hummer. We are a little bit surprised about the noise this little thing is marking. Is there a chance to only use the magnet and vibration without audio? Or is this not recommendable? Thanks in advance!
Hé, aujourd'hui, nous avons reçu notre Hummer. Nous sommes un peu surpris du bruit que cette petite chose marque. Y a-t-il une chance d'utiliser uniquement l'aimant et la vibration sans audio? Ou est-ce déconseillé? Merci d'avance!
Hi, Anton.
Im really into Hummer!
I have a question.
When I use Hummer, does it have any sound?
for example, when I use it with an audible IC, does it make any sound or just vibration?
Actually I don't want to bother anybody while Im using Hummer.
Thanks!
Salut, Anton. Im vraiment dans Hummer! J'ai une question. Lorsque j'utilise Hummer, y a-t-il un son? par exemple, lorsque je l'utilise avec un IC audible, émet-il un son ou juste une vibration? En fait, je ne veux déranger personne pendant que j'utilise Hummer. Merci!