Find Answers to Your Questions

Frequently Asked Questions

1. What are ICs? What is the connection between Homeopathy and ICs?

ICs are electromagnetic signals that are generated using algorithms or recorded from substances that have healing, therapeutic, or other biological effects. Simply put, ICs can be regarded as the evolution of homeopathy for the 21st century. Much like homeopathy, ICs work by stimulating the body’s own healing abilities. It is possible to imprint ICs to water and then by consuming this water, deliver the information to the body to promote self-healing.

2. Should I substitute my medication with ICs?

No. If you currently use any medication, do not replace them with ICs. ICs should be used to complement your treatment. If or when you will need to change anything regarding your medication, contact the practitioner who prescribed the medication to you and they will make the necessary adjustments.

3. How much IC water should I drink? Is there a dose-effect relationship?

It does not matter whether you drink 250 mL of IC water or 1 L - one glass of IC water contains the same amount of information as two glasses of water with the same IC. What is important is to drink IC water 2-3 times per day. This is because we need to periodically supply and influence the body with ICs in order to cause an informational effect on the body.

4. How should I store the prepared IC water?

IC water should be stored at room temperature, away from direct sunlight, and at least one meter away from electrical devices.

5. Are there any side effects from using ICs?

There have been no reports of negative effects from ICs. If an IC is not right for you, it will not resonate with your body and thus will not affect you. Some people may notice mild body pain during the first few days of using infoceuticals, which is normal and practitioners interpret this as the start of the body’s healing process using the newly acquired information. If you have any concerns, please contact your practitioner.

6. Can children use ICs?

Children may use ICs under parental supervision. If your child is taking any medication, do not substitute their medication with infoceuticals - infoceuticals should be used to complement their current treatment.

7. Can I give ICs to my pet?

You may give ICs to your pet. However, if your pet is taking any medication, do not substitute their medication with ICs.

8. How many ICs can I include in my personal complex?

The number of ICs that can be included in a personal IC complex depends on the person’s health and energy state. For some, 10 or more ICs in a complex works well; however, this is not the case for everyone. On average it is recommended to start with up to 6 ICs per personal complex. Depending on how you feel, you can increase (or decrease) the number of ICs in the complex.

9. How often is it recommended to take ICs to see results?

In general, it is recommended to drink IC water 2-3 times per day. This is because we need to periodically supply and influence the body with ICs in order to cause an informational effect on the body. With respect to seeing results, that depends given it is different for everyone – some may see results within a day, while others need more time. Moreover, it depends on the health condition, whether it is chronic or acute.

10. If ICs have the same vibration as the real substance, why take ICs? Why not just ingest the real thing?

ICs are not substitutes for real substances! It is usually a good idea to keep real substances as part of the diet. However, some people may have problems related to the substance such as difficulty with digestion and absorption, allergic reaction, lack of access, dislike the taste or smell, etc. To ensure people are still able to obtain the benefits associated with the substance, they can try infoceuticals.

Additional questions from users



BH
May 09, 2021
Can you mix vitamin powder or protein powder in with ic complex?
Hi Bob, yes, you can add vitamins or proteins to your water and then transfer ICs to that water.
T
May 08, 2021
Can I use this for my multiple sclerosis disease? My symptoms are the same. I also used the multiple sclerosis program, but I didn’t feel anything more than that.
Show original
Hi Timi, you may need to use it for a longer period of time and make sure you take IC water at least three times a day.
Show original
HP
May 08, 2021
Hi there. I have just purchased the pad and 2 hummers. Can my husband and I log in at the same time and use a hummer each?
Hi Helen, yes, that should be possible. From time to time you may be asked to log in again to your account on a second device.
C
May 07, 2021
Good morning, I just received my new glow pad, but am having trouble transferring. When I charge it, the yellow light turns on, but then after about 1 minute, it turns off. But, it won't glow when I start a transfer (the volume is all the way up on my laptop), what am I doing wrong? Thank you for any guidance, Chiara
Hi Chiara, Please watch a short video on how to set up Glowing IC Pad at "how to use Glowing IC Pad page". If the yellow light goes off in 1 minute then IC Pad is fully charged. To transfer ICs you need to connect IC Pad to your smartphone or laptop with an audio cable. During the transfer, you should not hear sound coming from your smartphone or laptop if using the Glowing IC Pad.
BS
May 04, 2021
Hi Anton, What is the optimal number of times too use the PEMF protocols for best results?
Hi Bill, you can use the same PEMF IC 1-2 times a day.
WM
May 01, 2021
what are Cymatics experiments? How / where are the suction cups attached? They do not appear removable.
Hi William, in Cymatics experiment you can visualize the frequencies. You need to attach IC Hummer with exactly at the centre of Petri dish (or other vessel) filled with water (setup requires precision and trying out different variations). You can see example in this video https://vimeo.com/491757034 (copy URL and put into browser address field). For the best effect, better to use single frequencies, for example 40 Hz.
SM
Apr 29, 2021
When I plug into computer or phone, it asks me if I am plugging in headphones, mic, or speaker or other device. What do I select?
Hi Shawn, you can select headphones. If you use Glowing IC Pad, make sure the audio volume is set to the maximum during the transfer and IC Pad should glow during the transfer.
T
Apr 27, 2021
Has your IC and Complexes on this site been tested (cross referenced) against people's actual blood work (mainly their liver blood test)? I just had my blood work done by my doctor and my liver (Aspartate Aminotransferase-AST) blood count significantly jumped from 25 to 66. I have never had my AST number higher than 32 in the past 6 years. My doctor said 50 or less is the normal range. Anything higher is a concern. Also I just found out today that my girlfriend just got back her bloodwork and her AST shot up to 220. Also her ALT Liver number is now at 90 (the norm range is 32). The only thing we have done differently in the past month was take your ICs and Complexes. This is very disturbing. Can someone please contact me at 917-476-9352 or email me at [email protected]
Hi Todd, thank you for your comment! we send you an email in regards to using alkaline water that you might use and liver health.
r
Apr 22, 2021
I have an older version of the glowing ic path, and when i conect it, it dosent glow, and i don't know how to charge it
Hi Roberta, we will send you an email on how to operate the previous version of Glowing IC Pad.
t
Apr 21, 2021
hi Anton i ordered some equipment on 11 march and it still hasnt been dispatched. may i get an update please.
Hi Tim, thank you for your order and we are very sorry for the delay, we are still waiting for parts to arrive at us. We expect to ship your order in the first week of May.
MT
Apr 20, 2021
Hi Anton, you instruct before a transfer that the water be shaken for 10 seconds. Am I correct in thinking this "erases" the water memory? Would this be similar to turbulence in a stream or a body of water?
Hi Michael, shaking is not "erases memory", it supposes to increase EZ phase conten in the water, which is considered to be responsible for storing ICs. When water goes down the stream in nature, there is turbulence (natural shaking) is happening as well.
MG
Apr 19, 2021
Hi Anton, Would tap water be unsuitable?
Hi Marie, if tap water is suitable for everyday drinking (good quality) then you can also use it.

Tips on using the site

Create your own IC Complex

Sign In and then click the Created button found on the ICs & Complexes page. Then click " New Complex" button. Fill in the form and click "Submit" when finished. Your personal IC Complex is now ready to use.

Copy an IC Complex

To create a copy of an existing IC Complex, Sign In and then click the " Copy & modify" button located at the bottom of the IC Complex card. Next, click the "Submit" button at the end of the form. However, if you wish to personalize the IC Complex, edit the form accordingly (i.e. modify the list of included ICs) and then press "Submit". The IC Complex you copied/modified will only be visible to you.

Quickly add an IC to a personal IC Complex

To quickly add an IC to your personal IC Complex, Sign In and then click on the " Add to Complex" button located at the bottom of the IC card. A list of your personal IC Complex will pop-up. Select which IC Complex you would like to add the IC to.

On the IC Complex page, what is the difference between the modes "Transfer all at once" and "One-by-one"? What mode should I choose?

When you select the mode "Transfer all at once", all the ICs in the IC Complex will be transferred at the same time. It is recommended to use this mode if you are imprinting ICs to water or other products.

When you select the mode "One-by-one", the ICs in an IC Complex will be transferred (played) one after another, like songs in a playlist. It is recommended to use this mode if the IC Complex consists of PEMF or Audible ICs. If the IC Complex is created by someone else and you would like to change the transfer order of the ICs, you will need to create a copy of the IC Complex by clicking the " Copy & modify" button. Then edit the IC Complex, if you wish. Once completed, click "Submit". You will now be able to reorder the ICs under the "One-by-one" mode.
Still need help?
Contact us