Find Answers to Your Questions

Frequently Asked Questions

1. What are ICs? What is the connection between Homeopathy and ICs?

ICs are electromagnetic signals that are generated using algorithms or recorded from substances that have healing, therapeutic, or other biological effects. Simply put, ICs can be regarded as the evolution of homeopathy for the 21st century. Much like homeopathy, ICs work by stimulating the body’s own healing abilities. It is possible to imprint ICs to water and then by consuming this water, deliver the information to the body to promote self-healing.

2. Should I substitute my medication with ICs?

No. If you currently use any medication, do not replace them with ICs. ICs should be used to complement your treatment. If or when you will need to change anything regarding your medication, contact the practitioner who prescribed the medication to you and they will make the necessary adjustments.

3. How much IC water should I drink? Is there a dose-effect relationship?

It does not matter whether you drink 250 mL of IC water or 1 L - one glass of IC water contains the same amount of information as two glasses of water with the same IC. What is important is to drink IC water 2-3 times per day. This is because we need to periodically supply and influence the body with ICs in order to cause an informational effect on the body.

4. How should I store the prepared IC water?

IC water should be stored at room temperature, away from direct sunlight, and at least one meter away from electrical devices.

5. Are there any side effects from using ICs?

There have been no reports of negative effects from ICs. If an IC is not right for you, it will not resonate with your body and thus will not affect you. Some people may notice mild body pain during the first few days of using infoceuticals, which is normal and practitioners interpret this as the start of the body’s healing process using the newly acquired information. If you have any concerns, please contact your practitioner.

6. Can children use ICs?

Children may use ICs under parental supervision. If your child is taking any medication, do not substitute their medication with infoceuticals - infoceuticals should be used to complement their current treatment.

7. Can I give ICs to my pet?

You may give ICs to your pet. However, if your pet is taking any medication, do not substitute their medication with ICs.

8. How many ICs can I include in my personal complex?

The number of ICs that can be included in a personal IC complex depends on the person’s health and energy state. For some, 10 or more ICs in a complex works well; however, this is not the case for everyone. On average it is recommended to start with up to 6 ICs per personal complex. Depending on how you feel, you can increase (or decrease) the number of ICs in the complex.

9. How often is it recommended to take ICs to see results?

In general, it is recommended to drink IC water 2-3 times per day. This is because we need to periodically supply and influence the body with ICs in order to cause an informational effect on the body. With respect to seeing results, that depends given it is different for everyone – some may see results within a day, while others need more time. Moreover, it depends on the health condition, whether it is chronic or acute.

10. If ICs have the same vibration as the real substance, why take ICs? Why not just ingest the real thing?

ICs are not substitutes for real substances! It is usually a good idea to keep real substances as part of the diet. However, some people may have problems related to the substance such as difficulty with digestion and absorption, allergic reaction, lack of access, dislike the taste or smell, etc. To ensure people are still able to obtain the benefits associated with the substance, they can try infoceuticals.

Additional questions from users



MP
Apr 05, 2022
Hi there. I’m travelling & want to take my glowing IC pad. Will it get damaged if it goes thru the security scanners?
Hi Monica, you can do so, other people take it on the plane with no problem.
MP
Apr 05, 2022
Anton Sheikh-Fedorenko, awesome! And thanks for the quick reply!
C
Mar 24, 2022
Can I imprint many different ICs to the water in one time or better imprint different ICs to the water individually ?
Hi CT, if you would like to imprint a few ICs to the same water then you need to create a complex with all those ICs and transfer them to water in "all at once" mode. You can learn here how to create complex: https://www.infopathy.com/en/tutorials/for_users?show=getting_started
C
Mar 24, 2022
Anton Sheikh-Fedorenko, How about the performance, one IC one water or few ICs in one water, which one is better? Thx
Hi CT, in general, we recommend starting from single ICs, then use small complexes (up to 6 ICs), and then you can also try larger complexes. Usually, there is no decrease in performance with complexes that have up to 6 ICs. Some people use much larger complexes and they also work for them.
N
Mar 17, 2022
Hi! Curious about the PEMFs Hz frequency for the IC Hummer. Which waveform does it use? What's the max intensity/gauss? Thanks!
Hi Nick, frequency is up to 20kHz. The waveform can be any, depending on the IC, Usually, it is square or a combination of sine waves. The field is about 2-3 Gauss near its surface.
L
Mar 16, 2022
how to return and get a refund
Hi Lynette, you can contact us at [email protected]
L
Mar 16, 2022
does the IC pad light up when it's connected?
Hi Lynette, circuit IC Pad does not light up during the transfer. You can use this IC to test Circuit IC Pad: https://www.infopathy.com/infoceuticals/high-pitch-test
C
Mar 14, 2022
I'm a multi tasker so I was wondering if I am actively using the IC pad as a pemf, will I be able to watch a you tube video on the same computer it is connected to or will that distort the transfer? Thanks.
Hi Cheri, when you connect IC Pad to your computer all sound will be going to the IC Pad, so you will be able to sound from the video. If you have smartphone you can use it to trnasfer PEMFs.
C
Mar 11, 2022
Hello! I also use zero water filters since we only have access to well water and it is loaded with chemicals. Should I dissolve a bioplasma cell salt in the water before charging it on the IC Pad? Thanks Also, I charge my face creams, does it add the additional components to the nutrients in it or replace them?
Hi Cheri, yes, it would be better if you add minerals to your water after filtration, bioplasma cell salt or just sea or Himalayan salt would also work (1 pinch for 1 litter of water). When you imprint cream, ICs are added to the cream, it does not remove any existing compounds.
We use a Zero water filter for our water since it is terrible out of the tap, but I believe that the Zero water filters out all or 99% of the minerals. Will this filtered water work well with the IC's? If not, can you suggest another water filter that will allow the minerals to remain in the water and work better with Infopathy and the IC's? Thank you!
Hi Elizabeth, you can remineralize water by adding a pinch of sea or Himalayan salt to 1 liter of filtered water. We use Greenfield Naturals water filtering system to remove bad substances and organisms and improve water. It is under sink 4 stage system: https://www.greenfieldwater.com/product-category/kitchen-structured-water-filters/
RZ
Mar 07, 2022
Hi I would like to know that are how do we know the Hz Frequency of the PEMFs in the website and the Gauss Intensity of the IC Pad.. Thanks
Hi Rocio, we will also answer you here so other people can see it: IC Pad emits weak magnetic waves, about 1500 gauss near its surface. Frequency range up to 20kHz. Imprint ICs have a complex spectrum. For some PEMF ICs frequency values are shown during the transfer.
MC
Mar 04, 2022
My glowing IC pad suddenly stopped glowing
Hi Maureen, please try the following: 1) Charge IC Pad for about 2 hours. 2) Make sure audio volume on your computer or phone is set to maximum after you start transfer 3) Restart your computer or phone 4) Replace Audio cable, it may be broken. The cable is called "3.5mm Aux cable". Please let me know if that helped. Thank you!
MC
Mar 05, 2022
Anton Sheikh-Fedorenko, I will do as you suggest and circle back to you with the results thank you for your quick response Maureen Corcoran
VM
Mar 02, 2022
mine stopped working also and only had about a week.
Hi Val, please try to charge IC Pad and restart your phone or computer.
Feb 26, 2022
It does not work
Show original
Hi Melanie, is it working for you now?
Show original

Tips on using the site

Create your own IC Complex

Sign In and then click the Created button found on the ICs & Complexes page. Then click " New Complex" button. Fill in the form and click "Submit" when finished. Your personal IC Complex is now ready to use.

Copy an IC Complex

To create a copy of an existing IC Complex, Sign In and then click the " Copy & modify" button located at the bottom of the IC Complex card. Next, click the "Submit" button at the end of the form. However, if you wish to personalize the IC Complex, edit the form accordingly (i.e. modify the list of included ICs) and then press "Submit". The IC Complex you copied/modified will only be visible to you.

Quickly add an IC to a personal IC Complex

To quickly add an IC to your personal IC Complex, Sign In and then click on the " Add to Complex" button located at the bottom of the IC card. A list of your personal IC Complex will pop-up. Select which IC Complex you would like to add the IC to.

On the IC Complex page, what is the difference between the modes "Transfer all at once" and "One-by-one"? What mode should I choose?

When you select the mode "Transfer all at once", all the ICs in the IC Complex will be transferred at the same time. It is recommended to use this mode if you are imprinting ICs to water or other products.

When you select the mode "One-by-one", the ICs in an IC Complex will be transferred (played) one after another, like songs in a playlist. It is recommended to use this mode if the IC Complex consists of PEMF or Audible ICs. If the IC Complex is created by someone else and you would like to change the transfer order of the ICs, you will need to create a copy of the IC Complex by clicking the " Copy & modify" button. Then edit the IC Complex, if you wish. Once completed, click "Submit". You will now be able to reorder the ICs under the "One-by-one" mode.
Still need help?
Contact us