Frequently Asked Questions
-
9
72476
Frequently Asked Questions
Replies
AT
Anna Teresa Facchinetti
Jan 26, 2025
Io ho il modello precedente a questo e il cavo รจ un cavo aux. Il nuovo Glowing Ic Pad 3 che tipo di cavo utilizza rispetto al vecchio modello? Grazie
I have the previous model to this one and the cable is an aux cable. What type of cable does the new Glowing Ic Pad 3 use compared to the old model? Thanks
Like
Liked
Reply
1
1 reply
Hide branch
Sara
Jan 22, 2025
Buongiorno Anton e tutti, vorrei avere maggiori informazioni su abbonamento primavera. Il mio abbonamento normale scade ad aprile. Io se dovessi prendere il piano primavera, pagherei entrambi gli abbonamenti?. Poi cosa vuol dire che nel piano primavera manca il sintetizzatore CEMP e FSM?. Grazie. Saluti a tutti Sara
Buongiorno Anton e tutti, vorrei avere maggiori informazioni su abbonamento primavera. Il mio abbonamento normale scade ad aprile. Io se dovessi prendere il piano primavera, pagherei entrambi gli abbonamenti?. Poi cosa vuol dire che nel piano primavera manca il sintetizzatore CEMP e FSM?. Grazie. Saluti a tutti Sara
Good morning Anton and all, I would like to have more information about the spring subscription. My normal subscription expires in April. If I were to take the spring plan, would I pay for both subscriptions? Then what does it mean that the CEMP and FSM synthesizer are missing from the spring plan? Thanks. Greetings to all Sara
Good morning Anton and all, I would like to have more information about the spring subscription. My normal subscription expires in April. If I were to take the spring plan, would I pay for both subscriptions? Then what does it mean that the CEMP and FSM synthesizer are missing from the spring plan? Thanks. Greetings to all Sara
Like
Liked
Reply
1
1 reply
Hide branch
KN
Keri Nola
Jan 21, 2025
Hi Anton, new member here and excited to get started. My volume is up and my glow pad is connected to bluetooth, but when I start a transfer I hear it from my computer, but the glow pad does not light up. Am I doing something wrong? I am on a macbook pro. Your guidance is appreciated. Thank you, Keri
Hi Anton, new member here and excited to get started. My volume is up and my glow pad is connected to bluetooth, but when I start a transfer I hear it from my computer, but the glow pad does not light up. Am I doing something wrong? I am on a macbook pro. Your guidance is appreciated. Thank you, Keri
Like
Liked
Reply
2
1 reply
Hide branch
CH
CJ Hernley
Jan 20, 2025
The lights on my Glowing IC pad no longer work. Is there a way to jumpstart it or does it require service?
Like
Liked
Reply
1
1 reply
Hide branch
AG
Andruhovici Gabriela
Jan 18, 2025
Buna Anton doresc sa anulez pentru o perioada abanamentul. cum trebuie sa procedez?
Hi Anton, I want to cancel my subscription for a while. How should I proceed?
Like
Liked
Reply
1
1 reply
Hide branch
CD
Carly Doull
Jan 17, 2025
Hi Antonโฆafter an adverse reaction to the Covid shot, I received a pacemaker โฆcan I still use the PEMFโs? If so, what about the ones where it states to apply to your sternum?
Like
Liked
Reply
1
1 reply
Hide branch
TS
Thomas Stagat
Jan 17, 2025
Hallo Anton, ich habe mir nun neben dem IC Pad 3 zusรคtzlich den IC Hummer bestellt. Ich mรถchte das ganze Potenzial der Therapien ausschรถpfen. Gibt es Empfehlungen wie ich die beiden Gerรคte am besten einsetze oder kombiniere? Welche PEMFs oder Imprints oder Audios sollte ich mit welchen Gerรคt auf Kรถrper oder Wasser anwenden um den besten Erfolg zu erzielen? Vielen Dank! Thomas
Hallo Anton, ich habe mir nun neben dem IC Pad 3 zusรคtzlich den IC Hummer bestellt. Ich mรถchte das ganze Potenzial der Therapien ausschรถpfen. Gibt es Empfehlungen wie ich die beiden Gerรคte am besten einsetze oder kombiniere? Welche PEMFs oder Imprints oder Audios sollte ich mit welchen Gerรคt auf Kรถrper oder Wasser anwenden um den besten Erfolg zu erzielen? Vielen Dank! Thomas
Hello Anton, I have now ordered the IC Hummer in addition to the IC Pad 3. I want to exploit the full potential of the therapies. Are there any recommendations on how I can best use or combine the two devices? Which PEMFs or imprints or audios should I use on my body or water with which device to achieve the best results? Thank you very much! Thomas
Hello Anton, I have now ordered the IC Hummer in addition to the IC Pad 3. I want to exploit the full potential of the therapies. Are there any recommendations on how I can best use or combine the two devices? Which PEMFs or imprints or audios should I use on my body or water with which device to achieve the best results? Thank you very much! Thomas
Like
Liked
Reply
1
1 reply
Hide branch
AW
Alicia Wickens
Jan 12, 2025
When I charge my glow pad 3 it has a red light and just as indicated it goes off after 3 hrs so I assume it is fully charged. When I turn it on though it still has a blinking red light and the lights donโt stay lit up or work on use. Does this mean I have a bum charging cord or it isnโt holding a charge. I tried to charge some more and same thing happens?
When I charge my glow pad 3 it has a red light and just as indicated it goes off after 3 hrs so I assume it is fully charged. When I turn it on though it still has a blinking red light and the lights donโt stay lit up or work on use. Does this mean I have a bum charging cord or it isnโt holding a charge. I tried to charge some more and same thing happens?
Like
Liked
Reply
1
1 reply
Hide branch
JD
Jennifer Duffy Russell
Jan 11, 2025
Hello Anton, I'm fascinated and new to infopseuticals. I'm not understanding how long an IC actually stays potent in water: If I make a quart, but only drink half today, how long is the rest good for? I did read that when it's half gone, I should add water, shake well and continu to use.. then on day three, make new batch. Do I understand that I can add more water twice (doubling the amount) before I have to imprint new... See more
Hello Anton, I'm fascinated and new to infopseuticals. I'm not understanding how long an IC actually stays potent in water: If I make a quart, but only drink half today, how long is the rest good for? I did read that when it's half gone, I should add water, shake well and continu to use.. then on day three, make new batch. Do I understand that I can add more water twice (doubling the amount) before I have to imprint new water? Thank you.
Like
Liked
Reply
1
1 reply
Hide branch
AW
Alicia Wickens
Jan 06, 2025
I have the new glow pad 3 and have followed the instructions to turn off Bluetooth. I hold for 10 secs see the red flashing light and then turn off. Everytime I do this it still shows up under other devices to pair on my iPhone. The video says it will not show up when Bluetooth is off. I donโt want any Bluetooth so how do I ensure it is turned off?
I have the new glow pad 3 and have followed the instructions to turn off Bluetooth. I hold for 10 secs see the red flashing light and then turn off. Everytime I do this it still shows up under other devices to pair on my iPhone. The video says it will not show up when Bluetooth is off. I donโt want any Bluetooth so how do I ensure it is turned off?
Like
Liked
Reply
1
1 reply
Hide branch
IS
Isabelle Spencer
Jan 05, 2025
Hi Anton, I'm using the Glowing IC Pad 2 but it's no longer lighting up blue when I am transferring. I have hardly used it and I haven't dropped it etc - do you know if there is anything I can do to fix it or will I need to buy you a new one?
Like
Liked
Reply
1
1 reply
Hide branch
GG
Gabriella Galvan
Jan 05, 2025
Hello I have an IC pad and used it about 7 times, when i plug it in and turn it on to imprint water with the blue light, it no longer blinks anymore while trying to transfer IC, please help thanks
Like
Liked
Reply
1
1 reply
Hide branch
Load more comments...
Please select language
Select