Hallo Anton. Seit gestern abend leuchtet mein Glowpad nicht mehr. Es ist geladen, gibt aber keinerlei Reaktionen mehr von sich. Ich habe es an Weihnachten 2022 gekauft. Irgendwelche Tipps?
Bonjour, concernant le Glowing IC Pad et le IC Hummer, il est indiquรฉ que le volume d'eau pour le transfert est de 0,2 litres en 2 minutes et pour le Circuit IC pad de 0,75 litres pour 12 minutes. Cela sous entend-il que pour le Glowing IC Pad et le IC Hummer nous devons renouveler l'opรฉration ร plusieurs reprises si la quantitรฉ d'eau est plus importante ou s'agit-il d'une erreur (2 litres ou 0.2 litres ?). Merci
Bonjour, concernant le Glowing IC Pad et le IC Hummer, il est indiquรฉ que le volume d'eau pour le transfert est de 0,2 litres en 2 minutes et pour le Circuit IC pad de 0,75 litres pour 12 minutes. Cela sous entend-il que pour le Glowing IC Pad et le IC Hummer nous devons renouveler l'opรฉration ร plusieurs reprises si la quantitรฉ d'eau est plus importante ou s'agit-il d'une erreur (2 litres ou 0.2 litres ?). Merci
Hello, regarding the Glowing IC Pad and the IC Hummer, it is indicated that the volume of water for the transfer is 0.2 liters in 2 minutes and for the Circuit IC pad 0.75 liters for 12 minutes. Does this imply that for the Glowing IC Pad and the IC Hummer we have to repeat the operation several times if the quantity of water is greater or is it an error (2 liters or 0.2 liters? ). Thanks
Hello, regarding the Glowing IC Pad and the IC Hummer, it is indicated that the volume of water for the transfer is 0.2 liters in 2 minutes and for the Circuit IC pad 0.75 liters for 12 minutes. Does this imply that for the Glowing IC Pad and the IC Hummer we have to repeat the operation several times if the quantity of water is greater or is it an error (2 liters or 0.2 liters? ). Thanks
Hello Anton, Read that when the ICs are for 2minuted, to run them for 12 minutes anyway. How does that apply when you have an IC COMPLEX of 34 min and about 8 2 minute ICs. Do you run the whole thing 6 times?
Last Sunday II started using my new glowing IC Pad and have used it a few times since. When I used it last night the light was nice and bright. When I came back a while later the light seemed a lot dimmer, so I added the charger. It didnโt seem to make much of a difference, but I let it continue. A while later I noticed that the light was out and thought I was done and could of use another IC Complex. To my surprise I... See more
Last Sunday II started using my new glowing IC Pad and have used it a few times since. When I used it last night the light was nice and bright. When I came back a while later the light seemed a lot dimmer, so I added the charger. It didnโt seem to make much of a difference, but I let it continue. A while later I noticed that the light was out and thought I was done and could of use another IC Complex. To my surprise I noticed that the previous IC Complex had not completely finished. I tried to turn it on again, but now there was no light at all. I even tried to charge it some more, but there was no yellow charging light either. Can you tell me what is wrong and what I can do to correct the problem? Many, many thanks, Ruth
Ik denk dat ik het weer, ik moet hem zeker weer opladen ๐Heb hem nu in de oplader staan, en ja... er brand een geel lampje, dus er zit nog leven in๐
I think I have it again, I definitely need to charge it again ๐Have it in the charger now, and yes... it has a yellow light on, so it still has life in it๐
ik ben op 14 december vorig jaar begonnen, en mijn IC-pad doet het ineens niet meer. eerst gaf hij minder licht tijdens een PEMF en al snel deed hij niks meer. Ik heb hem steeds via de laptop gebruikt, dus er kon ook niks mee gebeuren. Ik neem aan dat ik garantie heb op de IC-pad, wat moet ik nu doen dan?
I started on December 14 last year, and my IC pad suddenly stopped working. first he gave less light during a PEMF and soon he didn't do anything anymore. I've always used it via the laptop, so nothing could happen to it. I assume that I have warranty on the IC pad, what should I do now?
Hi, I was wondering: if I am applying a PEMF infoceutical to my body through the Hummer, is it important that I actually be able to hear the sound being emitted, or can I be listening to music on headphones at the same time? Thanks.
I have a new small round, acrylic, herb infused ic platform. Im using it for the first time. I cannot tell if it is working. There are no lights, no ability to charge and when i perform High Pitch Test, i hear nothing. How can i tell if its working?
Ik neem aan dat ik garantie heb op de IC-pad, wat moet ik nu doen dan?
I assume that I have warranty on the IC pad, what should I do now?