Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Marlene Van Esch the water should have a temperature below 30C (86F) and above 2C (36F). If you wish to transfer ICs to tea, prepare the tea, allow it to cool, and then transfer the ICs.
Marlene Van Esch the water should have a temperature below 30°C (86°F) and above 2°C (36°F). If you wish to transfer ICs to tea, prepare the tea, allow it to cool, and then transfer the ICs.
Marlene Van Esch Die Wassertemperatur sollte unter 30 C (86 F) und über 2 C (36 F) liegen. Wenn Sie ICs in Tee überführen möchten, bereiten Sie den Tee zu, lassen Sie ihn abkühlen und übertragen Sie dann die ICs.
Marlene Van Esch Die Wassertemperatur sollte unter 30 °C (86 °F) und über 2 °C (36 °F) liegen. Wenn Sie ICs in Tee überführen möchten, bereiten Sie den Tee zu, lassen Sie ihn abkühlen und übertragen Sie dann die ICs.
My glowpad is on and connected to my iPad via bluetooth howeverwhen I begin Toruń the PEMF the small light turns red then goes to white and noneofthelights blink on any of the settings and it wont run. /
Mein Glowpad ist eingeschaltet und über Bluetooth mit meinem iPad verbunden. Wenn ich jedoch das PEMF starte, leuchtet das kleine Licht rot und dann weiß. Keines der Lichter blinkt bei irgendeiner Einstellung und es läuft nicht. /
Allison B, please check the troubleshooting video here: https://www.infopathy.com/en/tutorials/devices?show=glowing3&source=web after IC Pad is connected to your phone via Bluetooth, you should see blue light flash on IC Pad for 1 second. If that does not happen, IC Pad is not connecting to your phone. Once IC Pad is connected and you start transfer you should not hear any sound, but check that the audio volume on your phone is set to... Mehr sehen
Allison B, please check the troubleshooting video here: https://www.infopathy.com/en/tutorials/devices?show=glowing3&source=web after IC Pad is connected to your phone via Bluetooth, you should see blue light flash on IC Pad for 1 second. If that does not happen, IC Pad is not connecting to your phone. Once IC Pad is connected and you start transfer you should not hear any sound, but check that the audio volume on your phone is set to maximum level.
Allison B , sehen Sie sich bitte hier das Video zur Fehlerbehebung an: https://www.infopathy.com/en/tutorials/devices?show=glowing3&source=web Nachdem das IC Pad über Bluetooth mit Ihrem Telefon verbunden wurde, sollte auf dem IC Pad für 1 Sekunde ein blaues Licht blinken. Wenn dies nicht geschieht, stellt das IC Pad keine Verbindung zu Ihrem Telefon her. Sobald das IC Pad verbunden ist und Sie mit der Übertragung beginnen, sollten Sie... Mehr sehen
Allison B , sehen Sie sich bitte hier das Video zur Fehlerbehebung an: https://www.infopathy.com/en/tutorials/devices?show=glowing3&source=web Nachdem das IC Pad über Bluetooth mit Ihrem Telefon verbunden wurde, sollte auf dem IC Pad für 1 Sekunde ein blaues Licht blinken. Wenn dies nicht geschieht, stellt das IC Pad keine Verbindung zu Ihrem Telefon her. Sobald das IC Pad verbunden ist und Sie mit der Übertragung beginnen, sollten Sie keinen Ton hören. Überprüfen Sie jedoch, ob die Lautstärke Ihres Telefons auf den maximalen Pegel eingestellt ist.