Hi Anton…after an adverse reaction to the Covid shot, I received a pacemaker …can I still use the PEMF’s? If so, what about the ones where it states to apply to your sternum?
Hallo Anton, ich habe mir nun neben dem IC Pad 3 zusätzlich den IC Hummer bestellt. Ich möchte das ganze Potenzial der Therapien ausschöpfen. Gibt es Empfehlungen wie ich die beiden Geräte am besten einsetze oder kombiniere? Welche PEMFs oder Imprints oder Audios sollte ich mit welchen Gerät auf Körper oder Wasser anwenden um den besten Erfolg zu erzielen? Vielen Dank! Thomas
Hallo Anton, ich habe mir nun neben dem IC Pad 3 zusätzlich den IC Hummer bestellt. Ich möchte das ganze Potenzial der Therapien ausschöpfen. Gibt es Empfehlungen wie ich die beiden Geräte am besten einsetze oder kombiniere? Welche PEMFs oder Imprints oder Audios sollte ich mit welchen Gerät auf Körper oder Wasser anwenden um den besten Erfolg zu erzielen? Vielen Dank! Thomas
안녕하세요 Anton. IC Pad 3 외에도 IC Hummer도 주문했습니다. 나는 치료법의 잠재력을 최대한 활용하고 싶습니다. 두 장치를 가장 잘 사용하거나 결합하는 방법에 대한 권장 사항이 있습니까? 최고의 성공을 거두려면 신체나 물에 어떤 PEMF, 각인 또는 오디오를 사용해야 합니까? 감사합니다! 도마
When I charge my glow pad 3 it has a red light and just as indicated it goes off after 3 hrs so I assume it is fully charged. When I turn it on though it still has a blinking red light and the lights don’t stay lit up or work on use. Does this mean I have a bum charging cord or it isn’t holding a charge. I tried to charge some more and same thing happens?
When I charge my glow pad 3 it has a red light and just as indicated it goes off after 3 hrs so I assume it is fully charged. When I turn it on though it still has a blinking red light and the lights don’t stay lit up or work on use. Does this mean I have a bum charging cord or it isn’t holding a charge. I tried to charge some more and same thing happens?
글로우 패드 3을 충전하면 빨간색 불이 들어오고 표시된 대로 3시간 후에 꺼지므로 완전히 충전된 것으로 추정합니다. 하지만 켜면 여전히 빨간색 불이 깜빡거리고 불이 계속 켜져 있지 않고 사용 중에 작동하지 않습니다. 이것은 충전 코드가 엉망인지 아니면 충전이 되지 않는다는 뜻인가요? 몇 번 더 충전하려고 했는데 같은 일이 발생합니까?
Hello Anton, I'm fascinated and new to infopseuticals. I'm not understanding how long an IC actually stays potent in water: If I make a quart, but only drink half today, how long is the rest good for? I did read that when it's half gone, I should add water, shake well and continu to use.. then on day three, make new batch. Do I understand that I can add more water twice (doubling the amount) before I have to imprint new water?... 더 보기
Hello Anton, I'm fascinated and new to infopseuticals. I'm not understanding how long an IC actually stays potent in water: If I make a quart, but only drink half today, how long is the rest good for? I did read that when it's half gone, I should add water, shake well and continu to use.. then on day three, make new batch. Do I understand that I can add more water twice (doubling the amount) before I have to imprint new water? Thank you.
안녕하세요, 안톤, 저는 인포프슈티컬에 흥미가 있고 처음입니다. IC가 물에서 실제로 얼마나 오래 효력을 유지하는지 이해가 안 갑니다. 1쿼트를 만들었는데 오늘 절반만 마셨다면 나머지는 얼마나 오래 유효할까요? 절반이 없어지면 물을 더 넣고 잘 흔들어서 계속 사용해야 한다는 글을 읽었습니다.. 그런 다음 3일차에 새로운 배치를 만듭니다. 새로운 물을 각인하기 전에 물을 두 배(두 배) 더 넣을 수 있다는 것을 알고 계신가요? 감사합니다.
I have the new glow pad 3 and have followed the instructions to turn off Bluetooth. I hold for 10 secs see the red flashing light and then turn off. Everytime I do this it still shows up under other devices to pair on my iPhone. The video says it will not show up when Bluetooth is off. I don’t want any Bluetooth so how do I ensure it is turned off?
I have the new glow pad 3 and have followed the instructions to turn off Bluetooth. I hold for 10 secs see the red flashing light and then turn off. Everytime I do this it still shows up under other devices to pair on my iPhone. The video says it will not show up when Bluetooth is off. I don’t want any Bluetooth so how do I ensure it is turned off?
저는 새로운 글로우 패드 3을 가지고 있고 블루투스를 끄는 지침을 따랐습니다. 10초 동안 누르고 있으면 빨간색으로 깜박이는 불빛이 보이고 꺼집니다. 이렇게 할 때마다 iPhone에서 페어링할 다른 기기 아래에 계속 표시됩니다. 비디오에서는 블루투스가 꺼져 있으면 표시되지 않는다고 합니다. 블루투스를 원하지 않는데 어떻게 꺼져 있는지 확인할 수 있나요?
Hi Anton, I'm using the Glowing IC Pad 2 but it's no longer lighting up blue when I am transferring. I have hardly used it and I haven't dropped it etc - do you know if there is anything I can do to fix it or will I need to buy you a new one?
Hello I have an IC pad and used it about 7 times, when i plug it in and turn it on to imprint water with the blue light, it no longer blinks anymore while trying to transfer IC, please help thanks
Hi, I made a PEMF complex and the first time I used it, my phone made weird, unpleasant buzzing noises all the way through. I don't understand why this happened and wasn't sure if it was supposed to. Then I tried it again and it didn't happen that time. Please could you explain? Thanks
Hi, I made a PEMF complex and the first time I used it, my phone made weird, unpleasant buzzing noises all the way through. I don't understand why this happened and wasn't sure if it was supposed to. Then I tried it again and it didn't happen that time. Please could you explain? Thanks
안녕하세요, 저는 PEMF 복합체를 만들었고 처음 사용했을 때, 제 전화기에서 이상하고 불쾌한 윙윙거리는 소리가 계속 들렸습니다. 왜 이런 일이 일어났는지 이해가 안 가고, 그럴 만한 일인지도 확신할 수 없었습니다. 그런 다음 다시 시도해 보았는데, 이번에는 그런 일이 일어나지 않았습니다. 설명해 주시겠습니까? 감사합니다.
whats is the difference between the https://www.infopathy.com/en/products/glowing-ic-pad-2 and https://www.infopathy.com/en/products/glowing-ic-pad-2 3 ?
Rife frequency 1150 Hz kills parasites on a cellular level. Any chance that we will see this as an IC choice on Infopathy? It's available on YouTube but it's over 11 hours long.