For using holographic stickers, is there a difference in effectiveness between the different sizes of stickers 1 inch 1.5 inch and 2 inch? Does larger mean a stronger field depth? Does larger mean less application time ?
¿Existe alguna diferencia en la efectividad de las pegatinas holográficas según su tamaño (1 pulgada, 1,5 pulgadas y 2 pulgadas)? ¿Un tamaño mayor implica una mayor profundidad de campo? ¿Un tamaño mayor implica menor tiempo de aplicación?
We are currently preparing a scientific manuscript describing experimental work performed using the Glowing IC Pad device for optical signal transmission into cell culture media.
In order to improve the technical description of the experimental setup, we would like to know whether you could provide additional information regarding the device specifications, particularly concerning the blue LED emission system.
The following parameters would be especially useful if available:
We are currently preparing a scientific manuscript describing experimental work performed using the Glowing IC Pad device for optical signal transmission into cell culture media.
In order to improve the technical description of the experimental setup, we would like to know whether you could provide additional information regarding the device specifications, particularly concerning the blue LED emission system.
The following parameters would be especially useful if available:
wavelength range of the blue LEDs (nm)
optical power output or irradiance (mW or mW/cm²)
pulsed versus continuous emission mode
possible pulse characteristics or modulation parameters
number and type of LEDs
approximate operating distance from the sample
potential temperature increase during operation
any available technical documentation or specifications
We are not seeking proprietary information, only general technical parameters that could help improve the Materials and Methods section of the manuscript.
Actualmente estamos preparando un manuscrito científico que describe el trabajo experimental realizado utilizando el dispositivo Glowing IC Pad para la transmisión de señales ópticas a medios de cultivo celular.
Para mejorar la descripción técnica del montaje experimental, nos gustaría saber si podría proporcionarnos información adicional sobre las especificaciones del dispositivo, en particular sobre el sistema de emisión de LED azules.
Los siguientes parámetros serían especialmente útiles si estuvieran... Ver más
Estimado Anton,
Actualmente estamos preparando un manuscrito científico que describe el trabajo experimental realizado utilizando el dispositivo Glowing IC Pad para la transmisión de señales ópticas a medios de cultivo celular.
Para mejorar la descripción técnica del montaje experimental, nos gustaría saber si podría proporcionarnos información adicional sobre las especificaciones del dispositivo, en particular sobre el sistema de emisión de LED azules.
Los siguientes parámetros serían especialmente útiles si estuvieran disponibles:
Rango de longitud de onda de los LED azules (nm)
Potencia óptica de salida o irradiancia (mW o mW/cm²)
modo de emisión pulsada frente a modo de emisión continua
posibles características de pulso o parámetros de modulación
Número y tipo de LED
distancia de funcionamiento aproximada desde la muestra
posible aumento de temperatura durante el funcionamiento
cualquier documentación técnica o especificaciones disponibles
No buscamos información confidencial, sino únicamente parámetros técnicos generales que puedan ayudar a mejorar la sección de Materiales y Métodos del manuscrito.
Are created and deleted complexes being deleted? I had hundreds created snd saved. Now they are most,y gone and I only have 47. They were reallyngood and saved lots of time in an ermergency.
¿Se están borrando los complejos creados y eliminados? Tenía cientos creados y guardados. Ahora casi todos han desaparecido y solo me quedan 47. Eran realmente útiles y me ahorraron mucho tiempo en una emergencia.
Hello! I was gifted a large glass pitcher with the intention that I use it to make a larger quantity of imprinted water. The person did not realize that I need to be able to a) vigorously shake the water first, and b) that the pitcher needs to sit on the Glow IC pad. So, in the spirit of being able to use this lovely gift I have a few... Ver más
Hello! I was gifted a large glass pitcher with the intention that I use it to make a larger quantity of imprinted water. The person did not realize that I need to be able to a) vigorously shake the water first, and b) that the pitcher needs to sit on the Glow IC pad. So, in the spirit of being able to use this lovely gift I have a few questions: Can I vigorously stir (as opposed to shake) the water in the pitcher to energize it prior to imprint? And if so, if the pitcher does balance nicely on the IC pad, but overhangs the edge by about 1” all around, is that still effective? Does leaving that pitcher out on the counter for the day for kids to refill glasses from maintain the imprint?
¡Hola! Me regalaron una jarra de vidrio grande con la intención de usarla para preparar una mayor cantidad de agua impresa. La persona no se dio cuenta de que necesito a) agitar el agua vigorosamente primero, y b) que la jarra debe estar sobre la almohadilla Glow IC. Así que, con la intención de poder usar este bonito regalo, tengo algunas preguntas: ¿Puedo remover vigorosamente (en lugar de agitar) el... Ver más
¡Hola! Me regalaron una jarra de vidrio grande con la intención de usarla para preparar una mayor cantidad de agua impresa. La persona no se dio cuenta de que necesito a) agitar el agua vigorosamente primero, y b) que la jarra debe estar sobre la almohadilla Glow IC. Así que, con la intención de poder usar este bonito regalo, tengo algunas preguntas: ¿Puedo remover vigorosamente (en lugar de agitar) el agua en la jarra para energizarla antes de la impresión? Y si es así, si la jarra se equilibra bien sobre la almohadilla IC, pero sobresale aproximadamente 2,5 cm por todos lados, ¿sigue siendo efectiva? ¿Dejar la jarra sobre la encimera durante el día para que los niños rellenen sus vasos mantiene la impresión?
I would like to try the Happy Water, but see there's anti depressant medicines in it. I take 300mg's of Wellbutrin XL daily and .5mg's of Clonazepam daily. Is it safe to drink the water? Can I still take my medications? Can I take the medications close to drinking the Happy Water? Are there any contraindications? Also, does the water have a cumulative effect and at a certain point you... Ver más
I would like to try the Happy Water, but see there's anti depressant medicines in it. I take 300mg's of Wellbutrin XL daily and .5mg's of Clonazepam daily. Is it safe to drink the water? Can I still take my medications? Can I take the medications close to drinking the Happy Water? Are there any contraindications? Also, does the water have a cumulative effect and at a certain point you don't need it? And lastly will it help settle my dysregulated nervous system, therefore settling my symptoms from FND and C-PTSD?
Me gustaría probar el Happy Water, pero veo que contiene antidepresivos. Tomo 300 mg de Wellbutrin XL y 0,5 mg de Clonazepam al día. ¿Es seguro beberlo? ¿Puedo seguir tomando mis medicamentos? ¿Puedo tomarlos poco antes de beber el Happy Water? ¿Existe alguna contraindicación? Además, ¿el agua tiene un efecto acumulativo y llega un punto en que ya no es necesaria? Y por último, ¿me ayudará a calmar mi sistema... Ver más
Me gustaría probar el Happy Water, pero veo que contiene antidepresivos. Tomo 300 mg de Wellbutrin XL y 0,5 mg de Clonazepam al día. ¿Es seguro beberlo? ¿Puedo seguir tomando mis medicamentos? ¿Puedo tomarlos poco antes de beber el Happy Water? ¿Existe alguna contraindicación? Además, ¿el agua tiene un efecto acumulativo y llega un punto en que ya no es necesaria? Y por último, ¿me ayudará a calmar mi sistema nervioso desregulado y, por lo tanto, a aliviar mis síntomas de FND y C-PTSD?
Hello Anton, My IC pad no longer seems to show the lights anymore during the IC transfers during the imprints. The lights work and the device is fully charged and I am following all of the protocols. It stopped working since the Oclacitinib Maleate was updated and now all that happens is I hear the sound during the transfer but no lights and I have tried other IC's that previously worked fine.
Hola Anton, mi tableta IC ya no muestra las luces durante las transferencias de IC al imprimir. Las luces funcionan, el dispositivo está completamente cargado y sigo todos los protocolos. Dejó de funcionar después de la actualización del maleato de oclacitinib y ahora solo escucho el sonido durante la transferencia, pero no se encienden las luces. He probado con otras tabletas IC que antes funcionaban bien.
Is it possible to download IC files? I see that you can download them in the mobile app, but is it possible to download the file itself outside the app? Thanks.
¿Es posible descargar archivos IC? Veo que se pueden descargar en la aplicación móvil, pero ¿es posible descargar el archivo directamente fuera de la aplicación? Gracias.
Anton - is there a protocol using ICs and complexes to address a parasite and other critters cleanse? I know there are remediies in the catalog, but is there a podcast or recommendation somewhere on the site as how to best approach this issue if one suspects they have parasites - which according to many health gurus - we all have! I just feel the need for some guidance with... Ver más
Anton - is there a protocol using ICs and complexes to address a parasite and other critters cleanse? I know there are remediies in the catalog, but is there a podcast or recommendation somewhere on the site as how to best approach this issue if one suspects they have parasites - which according to many health gurus - we all have! I just feel the need for some guidance with this due to the potential side effects (if any) like there can be with other natural remedy cleanses. We hear so much about Fenbendazole and Ivermectin so curious if there's a protocol for these as relates to detoxing. Thank you in advance!
Anton, ¿existe algún protocolo que utilice IC y complejos para desintoxicar el organismo de parásitos y otros microorganismos? Sé que hay remedios en el catálogo, pero ¿hay algún podcast o recomendación en el sitio sobre la mejor manera de abordar este problema si uno sospecha tener parásitos? Según muchos expertos en salud, ¡todos los tenemos! Necesito orientación al respecto debido a los posibles efectos secundarios (si los hay), como ocurre... Ver más
Anton, ¿existe algún protocolo que utilice IC y complejos para desintoxicar el organismo de parásitos y otros microorganismos? Sé que hay remedios en el catálogo, pero ¿hay algún podcast o recomendación en el sitio sobre la mejor manera de abordar este problema si uno sospecha tener parásitos? Según muchos expertos en salud, ¡todos los tenemos! Necesito orientación al respecto debido a los posibles efectos secundarios (si los hay), como ocurre con otras limpiezas con remedios naturales. Se habla mucho del fenbendazol y la ivermectina, así que me gustaría saber si existe algún protocolo para su uso en la desintoxicación. ¡Gracias de antemano!
I have had my glow IC pad for a couple of years and just started using it again. It is not showing up in my Bluetooth settings on my iPhone or iPad anymore. I pressed forget this device to get to reconnect and it’s not showing as a suggested new device. Could the Bluetooth on the glow disc stop working?
Tengo mi tableta Glow IC desde hace un par de años y acabo de empezar a usarla de nuevo. Ya no aparece en la configuración de Bluetooth de mi iPhone ni de mi iPad. Intenté volver a conectarla pulsando "Olvidar este dispositivo", pero no aparece como dispositivo sugerido. ¿Podría ser que el Bluetooth de la tableta haya dejado de funcionar?
Liebe Grüße
Sandra
Atentamente
Sandra