Hi Anton SF - I asked this question in Infopathy Fb group too, and they suggested I ask you directly.
I have a Glowing IC Pad 3 and I’d like to use it with the PEMFhealing app as well.
I understand it’s not a typical coil (like a rodin coil), but it can handle all the frequency specs the PEMFhealing app can generate (full spectrum, two channels, etc.)?
Hi Anton SF - I asked this question in Infopathy Fb group too, and they suggested I ask you directly.
I have a Glowing IC Pad 3 and I’d like to use it with the PEMFhealing app as well.
I understand it’s not a typical coil (like a rodin coil), but it can handle all the frequency specs the PEMFhealing app can generate (full spectrum, two channels, etc.)?
If you can explain how the PEMF output from the Glowing IC Pad 3 works, that would be great.
I haven’t found any test results—how large is the field from the IC Pad 3, and if is a coherent field? It would also be great to see a visual field test of this device on an oscilloscope if you have.
For the first time I connected the Glowing IC pad to my computer after charging the IC pad. The red light turned to white and I fully expected the pad was fully charged. However, when placing a glass of water onto the pad the lights indicating imprinting was happening, did not show up and there was no result showing the process had completed. I was trying to imprint "Astaxanthin". Is there some instruction I have missed. Please advise. Thank you.
처음으로 글로잉 IC 패드를 충전한 후 컴퓨터에 연결했습니다. 빨간색 불이 흰색으로 바뀌어서 패드가 완전히 충전된 줄 알았습니다. 하지만 패드 위에 물 한 컵을 올려놓았는데, 각인 과정을 나타내는 표시등이 켜지지 않았고, 과정이 완료되었다는 결과도 나타나지 않았습니다. "아스타잔틴"을 각인하려고 했습니다. 제가 어떤 사용 설명서를 놓친 걸까요? 조언 부탁드립니다. 감사합니다.
Bonjour Anton, quels poconeols vous manquent ? Un de mes amis qui est aussi sur infopathy les a sous forme homéopathique et pourrait peut-être vous passer ceux qui manquent si ça vous dit ?
hi! My "glowing IC Pad 3" isn't glowing! I can choose a light mode no problem, so I know it has lights, but when I transfer an imprint, nothing happens ( I can hear noise through the computer). When I try a PEMF, I get noise through the computer, but no lights. I've looked through all of the help. Can you help me understand what I am doing wrong please?
안녕하세요! 제 "발광 IC 패드 3"에 불이 들어오지 않아요! 조명 모드는 문제없이 선택할 수 있어서 LED 자체는 불이 들어오는 것 같은데, 각인을 전사하려고 하면 아무 반응이 없어요 (컴퓨터에서 소리만 들립니다). PEMF를 시도해 봐도 컴퓨터에서 소리는 나지만 불빛은 들어오지 않아요. 도움말도 다 찾아봤는데 안 되네요. 제가 뭘 잘못하고 있는 건지 알려주시면 정말 감사하겠습니다.
Thank you for this - I will be ordering in the next day or two. I ma located in Surrey, BC and will be moving in a couple of weeks. Do you think it will arrive before my move? Thank you
hello, what are the "special collections"? Dr. Akemi mentioned Vagus reboot and activate in the "special collections". Thanks for helping me access this ic.
Hallo, ich habe mich im April 2025 für eine Mitgliedschaft entschieden und habe für das Jahr 89,90 € bezahlt. Mir fehlt die Rechnung zu dieser Zahlung von Ihnen. Ich kann sie hier auch nicht in meinen Kontodaten finden. LG Astrid
I have a Glowing IC Pad 3 and I’d like to use it with the PEMFhealing app as well.
I understand it’s not a typical coil (like a rodin coil), but it can handle all the frequency specs the PEMFhealing app can generate (full spectrum, two channels, etc.)?
If you... 더 보기
I have a Glowing IC Pad 3 and I’d like to use it with the PEMFhealing app as well.
I understand it’s not a typical coil (like a rodin coil), but it can handle all the frequency specs the PEMFhealing app can generate (full spectrum, two channels, etc.)?
If you can explain how the PEMF output from the Glowing IC Pad 3 works, that would be great.
I haven’t found any test results—how large is the field from the IC Pad 3, and if is a coherent field? It would also be great to see a visual field test of this device on an oscilloscope if you have.
Thank you so much ;)
저는 Glowing IC Pad 3를 가지고 있는데, PEMFhealing 앱과 함께 사용하고 싶습니다.
일반적인 코일(예: 로딘 코일)은 아니지만, PEMFhealing 앱에서 생성할 수 있는 모든 주파수 사양(전체 스펙트럼, 2채널 등)을 처리할 수 있다는 것을 이해합니다.
글로잉 IC 패드 3에서 발생하는 PEMF 출력이 어떻게 작동하는지 설명해 주시면 정말 감사하겠습니다.
테스트 결과를 찾지 못했는데, IC 패드 3에서 발생하는 자기장의 크기는... 더 보기
저는 Glowing IC Pad 3를 가지고 있는데, PEMFhealing 앱과 함께 사용하고 싶습니다.
일반적인 코일(예: 로딘 코일)은 아니지만, PEMFhealing 앱에서 생성할 수 있는 모든 주파수 사양(전체 스펙트럼, 2채널 등)을 처리할 수 있다는 것을 이해합니다.
글로잉 IC 패드 3에서 발생하는 PEMF 출력이 어떻게 작동하는지 설명해 주시면 정말 감사하겠습니다.
테스트 결과를 찾지 못했는데, IC 패드 3에서 발생하는 자기장의 크기는 어느 정도이며, 간섭성 자기장인지 궁금합니다. 가능하다면 오실로스코프로 이 장치의 자기장 테스트 결과를 보여주시면 감사하겠습니다.
매우 감사합니다 ;)
Vielen Dank !
감사합니다 !
super, vielen Dank für die Info.
Liebe Grüße
Astrid
좋아요, 정보 주셔서 정말 감사합니다.
진심으로 감사드립니다.
아스트리드