Could you make an IC from itraconazole? This substance helps with the skin disease Pityriasis versicolor. Or do you have a different IC program for this?
I have the new one received this week finally! yes! i tried to figure out but it doesn't work yet. it is connected with bluetooth, but still doesn't work, what can i do more?
HI. can you give detail on how to run a program for emf protection during a flight without using the planes wi-fi. Or do I need to by wifi time on the flight? Do i need to do something on-line to enable it before I get on the flight? Sorry, I have just not been able to figure this out. Thank you
안녕. 비행기 Wi-Fi를 사용하지 않고 비행 중에 EMF 보호 프로그램을 실행하는 방법에 대해 자세히 알려주실 수 있나요? 아니면 비행기에서 Wi-Fi 시간까지 기다려야 합니까? 비행기에 탑승하기 전에 활성화하려면 온라인에서 뭔가를 해야 합니까? 죄송합니다. 저는 이 문제를 파악하지 못했습니다. 감사합니다
Hi there I am having a world of trouble trying to charge my IC pads. You replaced one that wasn’t charging and now the other one is doing the same thing, the cords seem to be an issue now. Can I get replacement chargers as can’t use either of them thanks .
Last night I was using my iPad to do a PEMF - the lights started getting dim. I put it onto charge and it took less time than normal. I was going to do an imprint today and it’s back to dim again. I put it back on to charge - it took 20 minutes. I tried to imprint again - it’s dim. I checked the IC test and it seems like it’s missing the blinking to what the test description says. I changed browsers and noticed the volume was down -... 더 보기
Hi Anton,
Last night I was using my iPad to do a PEMF - the lights started getting dim. I put it onto charge and it took less time than normal. I was going to do an imprint today and it’s back to dim again. I put it back on to charge - it took 20 minutes. I tried to imprint again - it’s dim. I checked the IC test and it seems like it’s missing the blinking to what the test description says. I changed browsers and noticed the volume was down - I turned up the volume and the lights are a little brighter but is definitely not as bright as they have been. I tried both IOS devices and both are up to date for updates. At times it blinks when there’s nothing attached to it. Whether cloud or sun lights would be very bright when doing imprint on IC - today they are not very bright. I had a problem with it a short time ago and it seemed to be working a little better - now it’s doing this?
어젯밤 나는 PEMF를 하기 위해 아이패드를 사용하고 있었는데, 조명이 어두워지기 시작했습니다. 충전해봤는데 평소보다 시간이 덜 걸렸어요. 오늘 각인을 하려고 했는데 다시 어두워졌네요. 다시 충전했는데 20분 정도 걸렸습니다. 다시 각인을 하려고 했는데 어두워요. IC 테스트를 확인해 보니 테스트 설명에 나와 있는 깜박임이 누락된 것 같습니다. 브라우저를 변경했는데 볼륨이 낮은 것을 발견했습니다. 볼륨을 올렸더니 조명이 조금 더 밝아졌지만 확실히 예전만큼 밝지는 않습니다. 두 IOS 장치를 모두 사용해 보았는데 둘 다 업데이트가 최신 상태입니다. 아무것도 부착되어 있지 않으면 때때로 깜박입니다. IC에 인쇄할 때 구름이나 태양광이 매우 밝을지는 모르지만 오늘날에는 그다지 밝지 않습니다. 얼마 전에 문제가 있었는데 조금 더 잘 작동하는 것 같았습니다. 이제 이렇게 됩니까?
어젯밤 나는 PEMF를 하기 위해 아이패드를 사용하고 있었는데, 조명이 어두워지기 시작했습니다. 충전해봤는데 평소보다 시간이 덜 걸렸어요. 오늘 각인을 하려고 했는데 다시 어두워졌네요. 다시 충전했는데 20분 정도 걸렸습니다. 다시 각인을 하려고 했는데 어두워요. IC 테스트를 확인해 보니 테스트 설명에 나와 있는 깜박임이 누락된 것 같습니다. 브라우저를 변경했는데 볼륨이 낮은 것을 발견했습니다. 볼륨을 올렸더니 조명이 조금 더 밝아졌지만 확실히 예전만큼 밝지는 않습니다. 두 IOS 장치를 모두 사용해 보았는데 둘 다 업데이트가 최신 상태입니다. 아무것도 부착되어 있지 않으면 때때로 깜박입니다. IC에 인쇄할 때 구름이나 태양광이 매우 밝을지는 모르지만 오늘날에는 그다지 밝지 않습니다. 얼마 전에 문제가 있었는데 조금 더 잘 작동하는 것 같았습니다. 이제 이렇게 됩니까?
How do you recommend “microdosing” the imprinted IC?
각인된 IC를 "미량 투여"하는 것을 어떻게 권장합니까?
Thanks
Wendy
감사해요
... 더 보기
감사해요
웬디