Hi Anton I am John from Italy, thanks for the prompt intervention, I see that it is working very well. I have another question to understand: when I finish transferring frequencies with my IC Complex and I want to add another combination of ICs in the same water what should be done, what is the most appropriate procedure? 1) Can I transfer more programs in the same water? 2) Do I have to make two separate transfers and then mix them?
Hi Anton I am John from Italy, thanks for the prompt intervention, I see that it is working very well. I have another question to understand: when I finish transferring frequencies with my IC Complex and I want to add another combination of ICs in the same water what should be done, what is the most appropriate procedure? 1) Can I transfer more programs in the same water? 2) Do I have to make two separate transfers and then mix them?
안녕하세요 Anton 저는 이탈리아의 John입니다. 신속한 개입에 감사드립니다. 매우 잘 작동하고 있습니다. 이해해야 할 또 다른 질문이 있습니다. IC Complex로 주파수 전송을 마치고 동일한 물에 다른 IC 조합을 추가하고 싶을 때 무엇을해야하는지 가장 적절한 절차는 무엇입니까? 1) 같은 물에서 더 많은 프로그램을 전송할 수 있습니까? 2) 두 번의 개별 이체를 한 다음 혼합해야합니까?
Hi Anton, I am John from Italy, I've been using the IC Glowing Pad for several days since I bought it. So far it has always worked wonderfully but tonight when I loaded the frequencies, the program loaded up to 99% and froze. I don't understand what it can depend on. The Glowing Pad is loaded, I have a super-performing PC with which I work. I have turned the PC off and on several times but your program freezes at 99%, what does it depend on?
Hi Anton, I am John from Italy, I've been using the IC Glowing Pad for several days since I bought it. So far it has always worked wonderfully but tonight when I loaded the frequencies, the program loaded up to 99% and froze. I don't understand what it can depend on. The Glowing Pad is loaded, I have a super-performing PC with which I work. I have turned the PC off and on several times but your program freezes at 99%, what does it depend on?
안녕하세요 Anton, 저는 이탈리아의 John입니다. IC Glowing Pad를 구입 한 후 며칠 동안 사용하고 있습니다. 지금까지는 항상 훌륭하게 작동했지만 오늘 밤 주파수를로드했을 때 프로그램이 99 %까지로드되고 멈췄습니다. 나는 그것이 무엇에 의존 할 수 있는지 이해하지 못합니다. Glowing Pad가로드되고 작업 할 수있는 고성능 PC가 있습니다. PC를 여러 번 껐다가 켰는데 프로그램이 99 %에서 멈 춥니 다. 그 이유는 무엇입니까?
There is a naltrexone infoceutical. In the description, it describes both naltrexone and low dose naltrexone. Which effect does it have? Also, can it be combined with one of the opioid frequencies or do they cancel each other out?
Hi Anton! I add ease-pemf in my IC complex and the transfer time went from 12 minute to around 4 minutes. Can put together substances based ic-s with pemf on the same complex( water) or have to download first the ic that I use and after that download in the same water the pemf. Thank you!
안녕 안톤! IC 컴플렉스에 ease-pemf를 추가했는데 전송 시간이 12 분에서 약 4 분으로 늘어났습니다. 동일한 복합물 (물)에 pemf와 함께 물질 기반 ic-s를 결합 할 수 있거나 내가 사용하는 IC를 먼저 다운로드하고 그 후에 동일한 물에서 pemf를 다운로드해야합니다. 감사합니다!
Good Morning,
I was trying to use my glowing pad this morning and seems it did not work properly. It stopped loading at 99% and just continue doing something. Never started count down. Any suggestions?
Thank you, Irene.
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters technology. Any studies with that? Thanks!
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters technology. Any studies with that? Thanks!
안녕 Anton, 수소가 풍부한 물에 icpad를 사용하는 것에 대한 연구가 있습니까? 수소 발생기 물병을 가지고 있는데 패드를 먼저 사용하거나 사용하기 위해 먼저 어떤 단계를해야하는지 궁금합니다. 또한 물이 패드에서 얼마나 떨어져있을 수 있고 신호가 유리가 아닌 다른 물질을 통과시킬 수 있습니까? 그리고이 기술이 트랜스 라이터 기술과 잘 작동하는지 궁금합니다. 그것에 대한 연구가 있습니까? 감사!
Hi Anton, I connect my glowing IC pad to my laptop, to the headphone jack - so, I don't hear anything, but the pad is glowing until transfer is complete. When I switch audio output on my laptop to my wireless bluetooth speaker, I can hear the transfer but the pad stops glowing. My question: As long as the pad glows during transfer, do I need to be concerned with not hearing it? Thank you.
안녕 Anton, 빛나는 IC 패드를 랩톱, 헤드폰 잭에 연결합니다. 그래서 아무 소리도 들리지 않지만 전송이 완료 될 때까지 패드가 빛납니다. 랩톱의 오디오 출력을 무선 블루투스 스피커로 전환하면 전송 소리는 들리지만 패드가 켜지지 않습니다. 내 질문 : 패드를 옮기는 동안 빛이 나는 한 듣지 못하는 것에 대해 걱정해야합니까? 감사합니다.