Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Wie kann ich testen, ob mein IC Glowing Pad richtig arbeitet? Nach Ablauf der Programme leuchtet es weiter. Ich hab alle Kabel entfernt, ausgesteckt, wieder reingesteckt. Erfolglos. Bei allen meinen Apple-Geräten. Anton SF ?
Wie kann ich testen, ob mein IC Glowing Pad richtig arbeitet? Nach Ablauf der Programme leuchtet es weiter. Ich hab alle Kabel entfernt, ausgesteckt, wieder reingesteckt. Erfolglos. Bei allen meinen Apple-Geräten. Anton SF ?
Angelika - my IC glow pad will also do that if my device gets an another signal that goes to the speaker. eg I'm running a PEMF from my iPhone and I receive a text that would usually make an alert noise ... it appears the alert noise confuses the original signal (sound) coming from the website to the IC glow pad and thus will either stop all signals or never stop and will continually light up. I have now turned my devices onto 'do not disturb' or... 더 보기
Angelika - my IC glow pad will also do that if my device gets an another signal that goes to the speaker. eg I'm running a PEMF from my iPhone and I receive a text that would usually make an alert noise ... it appears the alert noise confuses the original signal (sound) coming from the website to the IC glow pad and thus will either stop all signals or never stop and will continually light up. I have now turned my devices onto 'do not disturb' or silent (button on side of iPhone) to see if this will stop the issue. It seems to help, but I haven't fully tested it on all devices. I have also had to reset (ie refresh) the infopathy website and turn it on again to ensure it is actually doing the full program.
Angelika- 내 장치가 스피커로 전달되는 또 다른 신호를 받으면 내 IC 발광 패드도 이를 수행합니다. 예를 들어 iPhone에서 PEMF를 실행 중인데 일반적으로 경고 소음을 발생시키는 텍스트를 수신합니다. 경고 소음이 웹 사이트에서 IC 발광 패드로 전달되는 원래 신호(사운드)를 혼동하는 것 같습니다. 모든 신호를 중지하거나 절대 멈추지 않고 계속해서 켜집니다. 이제 장치를 '방해 금지' 또는 무음(iPhone 측면의 버튼)으로 설정하여 문제가 해결되는지 확인했습니다. 도움이 될 것 같지만 모든 장치에서 완전히 테스트하지는 않았습니다. 나는 또한 infopathy 웹사이트를 재설정(즉 새로 고침)하고 다시 켜서 실제로 전체 프로그램을 수행하는지 확인해야 했습니다.
Angelika- 내 장치가 스피커로 전달되는 또 다른 신호를 받으면 내 IC 발광 패드도 이를 수행합니다. 예를 들어 iPhone에서 PEMF를 실행 중인데 일반적으로 경고 소음을 발생시키는 텍스트를 수신합니다. 경고 소음이 웹 사이트에서 IC 발광 패드로 전달되는 원래 신호(사운드)를 혼동하는 것 같습니다. 모든 신호를 중지하거나 절대 멈추지 않고 계속해서 켜집니다. 이제 장치를 '방해 금지' 또는 무음(iPhone 측면의 버튼)으로 설정하여 문제가 해결되는지 확인했습니다. 도움이 될 것 같지만 모든 장치에서 완전히 테스트하지는 않았습니다. 나는 또한 infopathy 웹사이트를 재설정(즉 새로 고침)하고 다시 켜서 실제로 전체 프로그램을 수행하는지 확인해야 했습니다.