Frequently Asked Questions
-
9
72458
Frequently Asked Questions
Replies
GS
Gabriel Stadler
12月12日, 2019
Is there a minimum amount of water for the 10 IC drops (Method 2)?
Thank you. Best regards Gabriel
顯示翻譯
已點讚
按讚
回覆
1
1 個回复
隱藏分支
LL
Lisa Lockwood
12月08日, 2019
There is a naltrexone infoceutical. In the description, it describes both naltrexone and low dose naltrexone. Which effect does it have? Also, can it be combined with one of the opioid frequencies or do they cancel each other out?
顯示翻譯
已點讚
按讚
回覆
1
1 個回复
隱藏分支
LM
Lidia Muntean
12月07日, 2019
Hi Anton! I add ease-pemf in my IC complex and the transfer time went from 12 minute to around 4 minutes. Can put together substances based ic-s with pemf on the same complex( water) or have to download first the ic that I use and after that download in the same water the pemf. Thank you!
Hi Anton! I add ease-pemf in my IC complex and the transfer time went from 12 minute to around 4 minutes. Can put together substances based ic-s with pemf on the same complex( water) or have to download first the ic that I use and after that download in the same water the pemf. Thank you!
已點讚
按讚
回覆
1
1 個回复
隱藏分支
ML
Mark Lee
12月04日, 2019
Hi is it possible for me to create or request an IC that is not currently available?
Hi is it possible for me to create or request an IC that is not currently available?
已點讚
按讚
回覆
2
1 個回复
隱藏分支
IB
Irene Bernstein
11月22日, 2019
Anton,
It worked.
Thank you,
Irene.
顯示翻譯
已點讚
按讚
回覆
2
0 個回复
隱藏分支
IB
Irene Bernstein
11月21日, 2019
Good Morning,
I was trying to use my glowing pad this morning and seems it did not work properly. It stopped loading at 99% and just continue doing something. Never started count down. Any suggestions?
Thank you, Irene.
顯示翻譯
已點讚
按讚
回覆
2
1 個回复
隱藏分支
DU
Dorothy Ulner
11月20日, 2019
Can I add liquid magnesium or boron to my water?
Can I add liquid magnesium or boron to my water?
已點讚
按讚
回覆
1
1 個回复
隱藏分支
Cody Boyd
11月08日, 2019
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters technology. Any studies with that? Thanks!
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters technology. Any studies with that? Thanks!
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters technology. Any studies with that? Thanks!
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters technology. Any studies with that? Thanks!
已點讚
按讚
回覆
1
1 個回复
隱藏分支
MM
Monica Manni
10月27日, 2019
Hi Anton, I connect my glowing IC pad to my laptop, to the headphone jack - so, I don't hear anything, but the pad is glowing until transfer is complete. When I switch audio output on my laptop to my wireless bluetooth speaker, I can hear the transfer but the pad stops glowing. My question: As long as the pad glows during transfer, do I need to be concerned with not hearing it? Thank you.
Hi Anton, I connect my glowing IC pad to my laptop, to the headphone jack - so, I don't hear anything, but the pad is glowing until transfer is complete. When I switch audio output on my laptop to my wireless bluetooth speaker, I can hear the transfer but the pad stops glowing. My question: As long as the pad glows during transfer, do I need to be concerned with not hearing it? Thank you.
Hi Anton, I connect my glowing IC pad to my laptop, to the headphone jack - so, I don't hear anything, but the pad is glowing until transfer is complete. When I switch audio output on my laptop to my wireless bluetooth speaker, I can hear the transfer but the pad stops glowing. My question: As long as the pad glows during transfer, do I need to be concerned with not hearing it? Thank you.
已點讚
按讚
回覆
1
1 個回复
隱藏分支
Elie Naulleau
10月15日, 2019
Hi there, I have a couple of questions : - you make the comparison with homeopathy, but I cannot find any information of the dilution of the infoceuticals. For instance Arnica could be in 5CH, 30CH, etc. Where I can find this information ? - I see that the infoceuticals are coming from various providers. Do you evaluate the quality of the infoceuticals you are being provided ? Do you guarantee they are conform to their description ? - Is there a way... 查看更多
Hi there,
I have a couple of questions :
- you make the comparison with homeopathy, but I cannot find any information of the dilution of the infoceuticals. For instance Arnica could be in 5CH, 30CH, etc. Where I can find this information ?
- I see that the infoceuticals are coming from various providers. Do you evaluate the quality of the infoceuticals you are being provided ? Do you guarantee they are conform to their description ?
- Is there a way to make my own infoceuticals files ? For instance if I own a scalar wave device.
Thank you
Hi there, I have a couple of questions : - you make the comparison with homeopathy, but I cannot find any information of the dilution of the infoceuticals. For instance Arnica could be in 5CH, 30CH, etc. Where I can find this information ? - I see that the infoceuticals are coming from various providers. Do you evaluate the quality of the infoceuticals you are being provided ? Do you guarantee they are conform to their description ? - Is there a... 查看更多
Hi there,
I have a couple of questions :
- you make the comparison with homeopathy, but I cannot find any information of the dilution of the infoceuticals. For instance Arnica could be in 5CH, 30CH, etc. Where I can find this information ?
- I see that the infoceuticals are coming from various providers. Do you evaluate the quality of the infoceuticals you are being provided ? Do you guarantee they are conform to their description ?
- Is there a way to make my own infoceuticals files ? For instance if I own a scalar wave device.
Thank you
已點讚
按讚
回覆
1
1 個回复
隱藏分支
np
nicola price
09月21日, 2019
Hello, can you please advise me if once I have infused the water with the IC can it be refrigeratored and maintain its effectiveness? Thanks.
顯示翻譯
已點讚
按讚
回覆
1
1 個回复
隱藏分支
A
Akiko
05月21日, 2019
What kind of bottles(materials) are good for making IC water? Is stainless bottle suitable?
What kind of bottles(materials) are good for making IC water? Is stainless bottle suitable?
已點讚
按讚
回覆
0
1 個回复
隱藏分支
加載更多評論...
請選擇語言
選擇