Our Glowpad has stopped responding to one of our devices, an iPhone, but still works fine with our other two devices, a different iPhone and an old iPad. Volume on full, tried logging out and in again, disconnected and reconnected to Bluetooth, nothing is resolving the issue. Can anyone make any other suggestions?
Our Glowpad has stopped responding to one of our devices, an iPhone, but still works fine with our other two devices, a different iPhone and an old iPad. Volume on full, tried logging out and in again, disconnected and reconnected to Bluetooth, nothing is resolving the issue. Can anyone make any other suggestions?
Il nostro Glowpad ha smesso di rispondere a uno dei nostri dispositivi, un iPhone, ma funziona ancora bene con gli altri due dispositivi, un altro iPhone e un vecchio iPad. Volume al massimo, ho provato a uscire e rientrare, ho disconnesso e riconnesso al Bluetooth, niente risolve il problema. Qualcuno puรฒ darmi altri suggerimenti?
Il nostro Glowpad ha smesso di rispondere a uno dei nostri dispositivi, un iPhone, ma funziona ancora bene con gli altri due dispositivi, un altro iPhone e un vecchio iPad. Volume al massimo, ho provato a uscire e rientrare, ho disconnesso e riconnesso al Bluetooth, niente risolve il problema. Qualcuno puรฒ darmi altri suggerimenti?
I am having trouble charging my glow pad. The orange light only comes on occasionally if I jiggle the cord just the right way but doesn't stay on. Is this a common problem? I did read one other person having this issue. How long should the glow pad last? I use it every day.
Ho problemi a caricare il mio glow pad. La luce arancione si accende solo occasionalmente se scuoto il cavo nel modo giusto, ma non rimane accesa. ร un problema comune? Ho letto che un'altra persona ha avuto questo problema. Quanto dovrebbe durare il glow pad? Lo uso tutti i giorni.
I've had this issue that suddenly started the past two days where certain infoceuticals that I'm trying to run into my IC Glowpad 3 just hang without starting (when I click the play button, the time never starts ticking down and the IC pad never lights up, and reloading the page doesn't help), while if I try other infoceuticals through the IC Glowpad, they work fine, so it's definitely not any sort of issue with phone connectivity with the... Vedi altro
I've had this issue that suddenly started the past two days where certain infoceuticals that I'm trying to run into my IC Glowpad 3 just hang without starting (when I click the play button, the time never starts ticking down and the IC pad never lights up, and reloading the page doesn't help), while if I try other infoceuticals through the IC Glowpad, they work fine, so it's definitely not any sort of issue with phone connectivity with the Glowpad. In the screenshot below is one of the ones that haven't been working for me the past two days with the screen I'm seeing:image.png421 KB
Ho avuto questo problema che รจ iniziato all'improvviso negli ultimi due giorni, per cui alcuni infoceutici che sto cercando di far funzionare nel mio IC Glowpad 3 si bloccano senza avviarsi (quando clicco sul pulsante di riproduzione, il tempo non inizia mai a scorrere e l'IC pad non si accende mai, e ricaricare la pagina non aiuta), mentre se provo altri infoceutici tramite l'IC Glowpad, funzionano bene, quindi non รจ sicuramente un problema di... Vedi altro
Ho avuto questo problema che รจ iniziato all'improvviso negli ultimi due giorni, per cui alcuni infoceutici che sto cercando di far funzionare nel mio IC Glowpad 3 si bloccano senza avviarsi (quando clicco sul pulsante di riproduzione, il tempo non inizia mai a scorrere e l'IC pad non si accende mai, e ricaricare la pagina non aiuta), mentre se provo altri infoceutici tramite l'IC Glowpad, funzionano bene, quindi non รจ sicuramente un problema di connettivitร del telefono con il Glowpad. Nello screenshot qui sotto รจ presente uno di quelli che non hanno funzionato per me negli ultimi due giorni con la schermata che vedo: image.png421 KB
Bonjour, j'aimerais savoir si lors de l'utilisation du Glowing IC Pad 3 en Bluetooth, la frรฉquence de cette connexion n'altรจre pas l'information transmise ร l'eau par l'appareil ? En vous remerciant d'avance de votre retour.
Buongiorno, vorrei sapere se utilizzando il Glowing IC Pad 3 in Bluetooth la frequenza di questa connessione non altera le informazioni trasmesse all'acqua dal dispositivo? Grazie in anticipo per il tuo feedback.
I think there is something wrong with my glowpad. The orange light doesn't illuminate when I plug it in to charge anymore. I've tried using different plug-ins, charging cords, and charging blocks and nothing works for the disc but they work for other devices I have.
Also, only the center of the disc lights up when I attempt to imprint water, but to a lesser extent than it used to. The blue lights around the edge no longer illuminate. I... Vedi altro
Hi,
I think there is something wrong with my glowpad. The orange light doesn't illuminate when I plug it in to charge anymore. I've tried using different plug-ins, charging cords, and charging blocks and nothing works for the disc but they work for other devices I have.
Also, only the center of the disc lights up when I attempt to imprint water, but to a lesser extent than it used to. The blue lights around the edge no longer illuminate. I take it that is just because the battery is too dead for them to work.
Is there anything else I can try or am I out of luck and the disc has just "expired"?
Penso che ci sia qualcosa che non va con il mio glowpad. La luce arancione non si accende piรน quando lo collego per caricarlo. Ho provato a usare diversi plug-in, cavi di ricarica e blocchi di ricarica e niente funziona per il disco, ma funzionano per altri dispositivi che ho.
Inoltre, solo il centro del disco si illumina quando provo a imprimere l'acqua, ma in misura minore rispetto a prima. Le luci blu attorno al bordo non si illuminano... Vedi altro
CIAO,
Penso che ci sia qualcosa che non va con il mio glowpad. La luce arancione non si accende piรน quando lo collego per caricarlo. Ho provato a usare diversi plug-in, cavi di ricarica e blocchi di ricarica e niente funziona per il disco, ma funzionano per altri dispositivi che ho.
Inoltre, solo il centro del disco si illumina quando provo a imprimere l'acqua, ma in misura minore rispetto a prima. Le luci blu attorno al bordo non si illuminano piรน. Immagino che sia solo perchรฉ la batteria รจ troppo scarica perchรฉ funzionino.
C'รจ qualcos'altro che posso provare o sono sfortunato e il disco รจ semplicemente "scaduto"?
Kann ich auch geschlossene Wasserflaschen mit IC prรคgen? Oder muss das Gefรคss/ Flasche geรถffnet sein?
Posso stampare con la tecnologia IC anche bottiglie d'acqua chiuse? Oppure il contenitore/la bottiglia deve essere aperto?
I think there is something wrong with my glowpad. The orange light doesn't illuminate when I plug it in to charge anymore. I've tried using different plug-ins, charging cords, and charging blocks and nothing works for the disc but they work for other devices I have.
Also, only the center of the disc lights up when I attempt to imprint water, but to a lesser extent than it used to. The blue lights around the edge no longer illuminate. I... Vedi altro
I think there is something wrong with my glowpad. The orange light doesn't illuminate when I plug it in to charge anymore. I've tried using different plug-ins, charging cords, and charging blocks and nothing works for the disc but they work for other devices I have.
Also, only the center of the disc lights up when I attempt to imprint water, but to a lesser extent than it used to. The blue lights around the edge no longer illuminate. I take it that is just because the battery is too dead for them to work.
Is there anything else I can try or am I out of luck and the disc has just "expired"?
Penso che ci sia qualcosa che non va con il mio glowpad. La luce arancione non si accende piรน quando lo collego per caricarlo. Ho provato a usare diversi plug-in, cavi di ricarica e blocchi di ricarica e niente funziona per il disco, ma funzionano per altri dispositivi che ho.
Inoltre, solo il centro del disco si illumina quando provo a imprimere l'acqua, ma in misura minore rispetto a prima. Le luci blu attorno al bordo non si illuminano... Vedi altro
Penso che ci sia qualcosa che non va con il mio glowpad. La luce arancione non si accende piรน quando lo collego per caricarlo. Ho provato a usare diversi plug-in, cavi di ricarica e blocchi di ricarica e niente funziona per il disco, ma funzionano per altri dispositivi che ho.
Inoltre, solo il centro del disco si illumina quando provo a imprimere l'acqua, ma in misura minore rispetto a prima. Le luci blu attorno al bordo non si illuminano piรน. Immagino che sia solo perchรฉ la batteria รจ troppo scarica perchรฉ funzionino.
C'รจ qualcos'altro che posso provare o sono sfortunato e il disco รจ semplicemente "scaduto"?