Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Hi Anton I am John from Italy, thanks for the prompt intervention, I see that it is working very well. I have another question to understand: when I finish transferring frequencies with my IC Complex and I want to add another combination of ICs in the same water what should be done, what is the most appropriate procedure? 1) Can I transfer more programs in the same water? 2) Do I have to make two separate transfers and then mix them?
Hi Anton I am John from Italy, thanks for the prompt intervention, I see that it is working very well. I have another question to understand: when I finish transferring frequencies with my IC Complex and I want to add another combination of ICs in the same water what should be done, what is the most appropriate procedure? 1) Can I transfer more programs in the same water? 2) Do I have to make two separate transfers and then mix them?
안녕하세요 Anton 저는 이탈리아의 John입니다. 신속한 개입에 감사드립니다. 매우 잘 작동하고 있습니다. 이해해야 할 또 다른 질문이 있습니다. IC Complex로 주파수 전송을 마치고 동일한 물에 다른 IC 조합을 추가하고 싶을 때 무엇을해야하는지 가장 적절한 절차는 무엇입니까? 1) 같은 물에서 더 많은 프로그램을 전송할 수 있습니까? 2) 두 번의 개별 이체를 한 다음 혼합해야합니까?
Hi John, thank you very much for your questions! After you transferred ICs into the water, better do not transfer anything on top of that. You can make two transfers on a separate volume of water and them mix them or better just prepare two separate volumes of water and drink them one after another. I hope that helps, if you have any other questions, please let us know! Thank you!
안녕하세요 John, 질문 해 주셔서 감사합니다! IC를 물에 옮긴 후에는 그 위에 아무것도 옮기지 않는 것이 좋습니다. 별도의 물에 두 번 옮길 수 있으며 혼합하거나 두 가지 별도의 물을 준비하여 차례로 마실 수 있습니다. 도움이 되었기를 바랍니다. 다른 질문이 있으면 알려주세요! 감사합니다!
Hi Anton, I am John from Italy, I've been using the IC Glowing Pad for several days since I bought it. So far it has always worked wonderfully but tonight when I loaded the frequencies, the program loaded up to 99% and froze. I don't understand what it can depend on. The Glowing Pad is loaded, I have a super-performing PC with which I work. I have turned the PC off and on several times but your program freezes at 99%, what does it depend on?
Hi Anton, I am John from Italy, I've been using the IC Glowing Pad for several days since I bought it. So far it has always worked wonderfully but tonight when I loaded the frequencies, the program loaded up to 99% and froze. I don't understand what it can depend on. The Glowing Pad is loaded, I have a super-performing PC with which I work. I have turned the PC off and on several times but your program freezes at 99%, what does it depend on?
안녕하세요 Anton, 저는 이탈리아의 John입니다. IC Glowing Pad를 구입 한 후 며칠 동안 사용하고 있습니다. 지금까지는 항상 훌륭하게 작동했지만 오늘 밤 주파수를로드했을 때 프로그램이 99 %까지로드되고 멈췄습니다. 나는 그것이 무엇에 의존 할 수 있는지 이해하지 못합니다. Glowing Pad가로드되고 작업 할 수있는 고성능 PC가 있습니다. PC를 여러 번 껐다가 켰는데 프로그램이 99 %에서 멈 춥니 다. 그 이유는 무엇입니까?
Hi Giovanni, thank you very much for your comment. We just checked and found that a few ICs had some incompatibility with older internet browsers and that was causing "freezes at 99%". We fixed it, please try to transfer it again, it should work. If you have any questions, please let us know! Thank you!
안녕하세요 Giovanni, 귀하의 의견에 감사드립니다. 방금 확인한 결과 일부 IC가 구형 인터넷 브라우저와 호환되지 않아 "99 %에서 멈춤"을 발생시키는 것으로 나타났습니다. 문제를 해결했습니다. 다시 전송 해주세요. 정상적으로 작동합니다. 궁금한 점이 있으면 알려주세요! 감사합니다!