I just got the Glowing IC Pad 3 as a backup for my GIP 2. This unit creates so much heat with PEMF. I assume that’s from the infrared. There is no non-infrared setting is there? I run hot and don’t need any additional heat!
Ho appena ricevuto il Glowing IC Pad 3 come backup per il mio GIP 2. Questa unità crea così tanto calore con PEMF. Presumo che provenga dagli infrarossi. Non esiste un'impostazione non a infrarossi, vero? Corro caldo e non ho bisogno di ulteriore calore!
Merci de l'information - Ou trouve t'on la durée du signal qui permettrait d'aller faire autre chose à la place d'attendre patiemment devant sont ordi la fin du signal. Merci
Grazie per l'informazione - Dove troviamo la durata del segnale che ci permetterebbe di andare a fare qualcos'altro invece di aspettare pazientemente davanti al nostro computer la fine del segnale. grazie
Anton SF I heard on some webinar that aluminum is a great carrier and emitter of frequencies. Could someone imprint onto aluminum foil and then apply to the body to receive the frequency continuously? I’ve tried the holographic stickers, but I’m not sure they work plus the ones I have are not that sticky.
Anton SF I heard on some webinar that aluminum is a great carrier and emitter of frequencies. Could someone imprint onto aluminum foil and then apply to the body to receive the frequency continuously? I’ve tried the holographic stickers, but I’m not sure they work plus the ones I have are not that sticky.
Anton SF Ho sentito in alcuni webinar che l'alluminio è un ottimo trasportatore ed emettitore di frequenze. Qualcuno potrebbe imprimere su un foglio di alluminio e poi applicarlo al corpo per ricevere la frequenza in modo continuo? Ho provato gli adesivi olografici, ma non sono sicuro che funzionino e inoltre quelli che ho non sono così appiccicosi.
Anton SF Ho sentito in alcuni webinar che l'alluminio è un ottimo trasportatore ed emettitore di frequenze. Qualcuno potrebbe imprimere su un foglio di alluminio e poi applicarlo al corpo per ricevere la frequenza in modo continuo? Ho provato gli adesivi olografici, ma non sono sicuro che funzionino e inoltre quelli che ho non sono così appiccicosi.
Bonjour, je sais que l' Huile essentiel d'ail est un répulsif très efficace contre l'altise sur les jeunes plants de légumes au jardin, alors, existe t-il une longueur d'onde spécifique à l'ail pour informer l'eau qui pourrait être utilisé comme répulsif comme l'ail ? Merci à l'avance de votre réponse.
Ciao, so che l'olio essenziale di aglio è un repellente molto efficace contro gli scarabei delle pulci sulle giovani piante di ortaggi in giardino, quindi esiste una lunghezza d'onda specifica dell'aglio per informare l'acqua che potrebbe essere usata come repellente come l'aglio? Grazie in anticipo per la tua risposta.
Can you imprint supplements like capsules/tablets and if so, how would one do that? Just put the supplement bottle (as long as it is transparent) onto Glowing IC pad or Hummer?
È possibile imprimere integratori come capsule/compresse e, in caso affermativo, come si farebbe? Metti semplicemente il flacone dell'integratore (purché sia trasparente) sul cuscinetto Glowing IC o sull'Hummer?
Hi Anton, there's a periodic issue I've been experiencing. The Glow Pad seems to get "stuck" on, and doesn't stop. It will sometimes go unnoticed for 30 - 60 minutes, and the Glow Pad becomes hot.
It happens mostly from the website, though I believe it has happened with the (beta) app also. It usually happens when playing an IC imprint on repeat, but does also happen when playing something only once, which usually is a PEMF.
Hi Anton, there's a periodic issue I've been experiencing. The Glow Pad seems to get "stuck" on, and doesn't stop. It will sometimes go unnoticed for 30 - 60 minutes, and the Glow Pad becomes hot.
It happens mostly from the website, though I believe it has happened with the (beta) app also. It usually happens when playing an IC imprint on repeat, but does also happen when playing something only once, which usually is a PEMF.
Is this something in the platform, or in the device itself, and does this happen for others? It happens often enough that I can't put on a PEMF as I'm going to sleep, charge something while I'm in another room, or put it on without paying attn to what it's doing.
Ciao Anton, c'è un problema periodico che sto riscontrando. Il Glow Pad sembra "bloccato" e non si ferma. A volte passerà inosservato per 30-60 minuti e il Glow Pad si surriscalda.
Succede principalmente dal sito web, anche se credo che sia successo anche con l'app (beta). Di solito accade quando si riproduce ripetutamente un'impronta IC, ma accade anche quando si riproduce qualcosa solo una volta, che di solito è un PEMF.
Ciao Anton, c'è un problema periodico che sto riscontrando. Il Glow Pad sembra "bloccato" e non si ferma. A volte passerà inosservato per 30-60 minuti e il Glow Pad si surriscalda.
Succede principalmente dal sito web, anche se credo che sia successo anche con l'app (beta). Di solito accade quando si riproduce ripetutamente un'impronta IC, ma accade anche quando si riproduce qualcosa solo una volta, che di solito è un PEMF.
È qualcosa nella piattaforma o nel dispositivo stesso e succede anche ad altri? Succede abbastanza spesso che non riesco a indossare un PEMF mentre vado a dormire, a caricare qualcosa mentre sono in un'altra stanza o a indossarlo senza prestare attenzione a ciò che sta facendo.
Gracias
Grazie
merci de votre réponse...
Grazie per la risposta...
It happens mostly from the website, though I believe it has happened with the (beta) app also. It usually happens when playing an IC imprint on repeat, but does also happen when playing something only once, which usually is a PEMF.
Is... Vedi altro
It happens mostly from the website, though I believe it has happened with the (beta) app also. It usually happens when playing an IC imprint on repeat, but does also happen when playing something only once, which usually is a PEMF.
Is this something in the platform, or in the device itself, and does this happen for others? It happens often enough that I can't put on a PEMF as I'm going to sleep, charge something while I'm in another room, or put it on without paying attn to what it's doing.
Thanks as always for your time.
Succede principalmente dal sito web, anche se credo che sia successo anche con l'app (beta). Di solito accade quando si riproduce ripetutamente un'impronta IC, ma accade anche quando si riproduce qualcosa solo una volta, che di solito è un PEMF.
È qualcosa nella... Vedi altro
Succede principalmente dal sito web, anche se credo che sia successo anche con l'app (beta). Di solito accade quando si riproduce ripetutamente un'impronta IC, ma accade anche quando si riproduce qualcosa solo una volta, che di solito è un PEMF.
È qualcosa nella piattaforma o nel dispositivo stesso e succede anche ad altri? Succede abbastanza spesso che non riesco a indossare un PEMF mentre vado a dormire, a caricare qualcosa mentre sono in un'altra stanza o a indossarlo senza prestare attenzione a ciò che sta facendo.
Grazie come sempre per il tuo tempo.