I just got the Glowing IC Pad 3 as a backup for my GIP 2. This unit creates so much heat with PEMF. I assume that’s from the infrared. There is no non-infrared setting is there? I run hot and don’t need any additional heat!
Ich habe gerade das Glowing IC Pad 3 als Backup für mein GIP 2 bekommen. Dieses Gerät erzeugt mit PEMF so viel Wärme. Ich nehme an, das kommt vom Infrarot. Es gibt keine Einstellung ohne Infrarot, oder? Mir wird heiß und ich brauche keine zusätzliche Wärme!
Vor ein paar Tagen habe ich ein Webinar zum Thema Hormone auf der Liste gesehen, aber jetzt, wo ich es sehen wollte, ist es nicht mehr da? Werden sie es erneut hochladen? Danke
Merci de l'information - Ou trouve t'on la durée du signal qui permettrait d'aller faire autre chose à la place d'attendre patiemment devant sont ordi la fin du signal. Merci
Vielen Dank für die Information. Wo finden wir die Dauer des Signals, die es uns ermöglichen würde, etwas anderes zu tun, anstatt geduldig vor unserem Computer auf das Ende des Signals zu warten? DANKE
Anton SF I heard on some webinar that aluminum is a great carrier and emitter of frequencies. Could someone imprint onto aluminum foil and then apply to the body to receive the frequency continuously? I’ve tried the holographic stickers, but I’m not sure they work plus the ones I have are not that sticky.
Anton SF I heard on some webinar that aluminum is a great carrier and emitter of frequencies. Could someone imprint onto aluminum foil and then apply to the body to receive the frequency continuously? I’ve tried the holographic stickers, but I’m not sure they work plus the ones I have are not that sticky.
Anton SF Ich habe in einem Webinar gehört, dass Aluminium ein hervorragender Träger und Sender von Frequenzen ist. Könnte jemand etwas auf Aluminiumfolie drucken und es dann auf den Körper auftragen, um die Frequenz kontinuierlich zu empfangen? Ich habe es mit holografischen Aufklebern versucht, bin mir aber nicht sicher, ob sie funktionieren, und die, die ich habe, haften nicht so gut.
Anton SF Ich habe in einem Webinar gehört, dass Aluminium ein hervorragender Träger und Sender von Frequenzen ist. Könnte jemand etwas auf Aluminiumfolie drucken und es dann auf den Körper auftragen, um die Frequenz kontinuierlich zu empfangen? Ich habe es mit holografischen Aufklebern versucht, bin mir aber nicht sicher, ob sie funktionieren, und die, die ich habe, haften nicht so gut.
Bonjour, je sais que l' Huile essentiel d'ail est un répulsif très efficace contre l'altise sur les jeunes plants de légumes au jardin, alors, existe t-il une longueur d'onde spécifique à l'ail pour informer l'eau qui pourrait être utilisé comme répulsif comme l'ail ? Merci à l'avance de votre réponse.
Hallo, ich weiß, dass ätherisches Knoblauchöl ein sehr wirksames Abwehrmittel gegen Flohkäfer an jungen Gemüsepflanzen im Garten ist. Gibt es also eine für Knoblauch spezifische Wellenlänge, um das Wasser zu informieren, das wie Knoblauch als Abwehrmittel verwendet werden könnte? Danke im Voraus für Ihre Antwort.
Can you imprint supplements like capsules/tablets and if so, how would one do that? Just put the supplement bottle (as long as it is transparent) onto Glowing IC pad or Hummer?
Kann man Nahrungsergänzungsmittel wie Kapseln/Tabletten bedrucken und wenn ja, wie macht man das? Einfach die Nahrungsergänzungsflasche (sofern sie transparent ist) auf ein Glowing IC Pad oder einen Hummer stellen?
Hi Anton, there's a periodic issue I've been experiencing. The Glow Pad seems to get "stuck" on, and doesn't stop. It will sometimes go unnoticed for 30 - 60 minutes, and the Glow Pad becomes hot.
It happens mostly from the website, though I believe it has happened with the (beta) app also. It usually happens when playing an IC imprint on repeat, but does also happen when playing something only once, which usually is a PEMF.
Hi Anton, there's a periodic issue I've been experiencing. The Glow Pad seems to get "stuck" on, and doesn't stop. It will sometimes go unnoticed for 30 - 60 minutes, and the Glow Pad becomes hot.
It happens mostly from the website, though I believe it has happened with the (beta) app also. It usually happens when playing an IC imprint on repeat, but does also happen when playing something only once, which usually is a PEMF.
Is this something in the platform, or in the device itself, and does this happen for others? It happens often enough that I can't put on a PEMF as I'm going to sleep, charge something while I'm in another room, or put it on without paying attn to what it's doing.
Hallo Anton, ich habe ein wiederkehrendes Problem. Das Glow Pad scheint „hängenzubleiben“ und hört nicht auf. Manchmal bleibt es 30 bis 60 Minuten lang unbemerkt und das Glow Pad wird heiß.
Das passiert meistens auf der Website, aber ich glaube, dass es auch mit der (Beta-)App passiert ist. Normalerweise passiert es, wenn ein IC-Abdruck wiederholt abgespielt wird, aber auch, wenn etwas nur einmal abgespielt wird, was normalerweise ein PEMF ist.... Mehr sehen
Hallo Anton, ich habe ein wiederkehrendes Problem. Das Glow Pad scheint „hängenzubleiben“ und hört nicht auf. Manchmal bleibt es 30 bis 60 Minuten lang unbemerkt und das Glow Pad wird heiß.
Das passiert meistens auf der Website, aber ich glaube, dass es auch mit der (Beta-)App passiert ist. Normalerweise passiert es, wenn ein IC-Abdruck wiederholt abgespielt wird, aber auch, wenn etwas nur einmal abgespielt wird, was normalerweise ein PEMF ist.
Liegt das an der Plattform oder am Gerät selbst, und passiert das auch anderen? Es passiert so oft, dass ich kein PEMF anlegen kann, wenn ich schlafen gehe, etwas auflade, während ich in einem anderen Raum bin, oder es anlegen kann, ohne darauf zu achten, was es tut.
Gracias
Danke
merci de votre réponse...
Danke für Ihre Antwort...
It happens mostly from the website, though I believe it has happened with the (beta) app also. It usually happens when playing an IC imprint on repeat, but does also happen when playing something only once, which usually is a PEMF.
Is... Mehr sehen
It happens mostly from the website, though I believe it has happened with the (beta) app also. It usually happens when playing an IC imprint on repeat, but does also happen when playing something only once, which usually is a PEMF.
Is this something in the platform, or in the device itself, and does this happen for others? It happens often enough that I can't put on a PEMF as I'm going to sleep, charge something while I'm in another room, or put it on without paying attn to what it's doing.
Thanks as always for your time.
Das passiert meistens auf der Website, aber ich glaube, dass es auch mit der (Beta-)App passiert ist. Normalerweise passiert es, wenn ein IC-Abdruck wiederholt abgespielt wird, aber auch, wenn etwas nur einmal abgespielt wird, was normalerweise ein PEMF ist.... Mehr sehen
Das passiert meistens auf der Website, aber ich glaube, dass es auch mit der (Beta-)App passiert ist. Normalerweise passiert es, wenn ein IC-Abdruck wiederholt abgespielt wird, aber auch, wenn etwas nur einmal abgespielt wird, was normalerweise ein PEMF ist.
Liegt das an der Plattform oder am Gerät selbst, und passiert das auch anderen? Es passiert so oft, dass ich kein PEMF anlegen kann, wenn ich schlafen gehe, etwas auflade, während ich in einem anderen Raum bin, oder es anlegen kann, ohne darauf zu achten, was es tut.
Vielen Dank wie immer für Ihre Zeit.