Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
HI Anton-following up on this answer from yestereday: 6) Include up to 6 ICs into your imprint complex. At least when you start, later you can try including more ICs into one complex and see how it works for you. Including too many ICs in one complex may result in no effect at all, as the body will not be able to process it. questions: 1)What would be the max of IC's in one complex? Right now I have about 15 imprints in one complex ( they are... 더 보기
HI Anton-following up on this answer from yestereday: 6) Include up to 6 ICs into your imprint complex. At least when you start, later you can try including more ICs into one complex and see how it works for you. Including too many ICs in one complex may result in no effect at all, as the body will not be able to process it. questions: 1)What would be the max of IC's in one complex? Right now I have about 15 imprints in one complex ( they are all interconnected with each other according to the organs of need) is that too much? 2)On the stickers how many pemf's and IC;s in general you can imprint on one sticker? 3) Would adding lemon before or after imprinted water increase the charge of the imprint? In another words could it be more effective. (lemon being highly conductive) Thank you!
HI Anton-어제의 답변에 대한 후속 조치: 6) 임프린트 콤플렉스에 최대 6개의 IC를 포함합니다. 최소한 시작할 때 나중에 더 많은 IC를 하나의 컴플렉스에 포함하고 어떻게 작동하는지 확인할 수 있습니다. 하나의 컴플렉스에 너무 많은 IC를 포함하면 신체가 처리할 수 없기 때문에 전혀 효과가 없을 수 있습니다. 질문: 1) 하나의 컴플렉스에서 IC의 최대값은 얼마입니까? 지금은 하나의 단지에 약 15개의 각인이 있습니다(필요한 기관에 따라 모두 서로 연결되어 있습니다). 2) 일반적으로 하나의 스티커에 몇 개의 pemf와 IC를 각인할 수 있습니까? 3) 각인 물 전후에 레몬을 넣으면 각인 전하가 증가할까요? 다시 말해 더 효과적일 수 있습니다. (레몬은 전도성이 높음) 감사합니다!
HI Anton-어제의 답변에 대한 후속 조치: 6) 임프린트 콤플렉스에 최대 6개의 IC를 포함합니다. 최소한 시작할 때 나중에 더 많은 IC를 하나의 컴플렉스에 포함하고 어떻게 작동하는지 확인할 수 있습니다. 하나의 컴플렉스에 너무 많은 IC를 포함하면 신체가 처리할 수 없기 때문에 전혀 효과가 없을 수 있습니다. 질문: 1) 하나의 컴플렉스에서 IC의 최대값은 얼마입니까? 지금은 하나의 단지에 약 15개의 각인이 있습니다(필요한 기관에 따라 모두 서로 연결되어 있습니다). 2) 일반적으로 하나의 스티커에 몇 개의 pemf와 IC를 각인할 수 있습니까? 3) 각인 물 전후에 레몬을 넣으면 각인 전하가 증가할까요? 다시 말해 더 효과적일 수 있습니다. (레몬은 전도성이 높음) 감사합니다!
Hi Gabriela, water and stickers can hold lots of information, but our body is a bottle neck usually. Some people create complexes with over 30 ICs and they work well for them. We suggests starting with small complexes and later increase their size to see how it works for you. Lemon would reduce water pH and it overall it is better for water to have higher pH for Imprint storage, for example by adding minerals (but just a little bit, too many... 더 보기
Hi Gabriela, water and stickers can hold lots of information, but our body is a bottle neck usually. Some people create complexes with over 30 ICs and they work well for them. We suggests starting with small complexes and later increase their size to see how it works for you. Lemon would reduce water pH and it overall it is better for water to have higher pH for Imprint storage, for example by adding minerals (but just a little bit, too many minerals not good for body). Higher effectiveness mostly achieved by imprinting for longer time (add more repeats) and drinking water for frequently. And as a basis you should of course use good quality water, shake it before imprinting and you can also expose it to infrared light and magnets before imprinting.
안녕 가브리엘라, 물과 스티커는 많은 정보를 담을 수 있지만 우리 몸은 보통 병목입니다. 어떤 사람들은 30개가 넘는 IC로 컴플렉스를 만들고 잘 작동합니다. 소규모 컴플렉스로 시작하여 나중에 크기를 늘려 어떻게 작동하는지 확인하는 것이 좋습니다. 레몬은 물의 pH를 낮출 수 있으며, 예를 들어 미네랄을 첨가하여 각인 저장을 위해 물의 pH를 높이는 것이 전반적으로 더 좋습니다(단, 미네랄이 너무 많으면 몸에 좋지 않음). 더 긴 시간 동안 각인(반복 횟수 추가)하고 물을 자주 마심으로써 더 높은 효과를 얻을 수 있습니다. 기본적으로 좋은 품질의 물을 사용하고 각인하기 전에 흔들어야 하며 각인하기 전에 적외선과 자석에 노출시킬 수도 있습니다.
안녕 가브리엘라, 물과 스티커는 많은 정보를 담을 수 있지만 우리 몸은 보통 병목입니다. 어떤 사람들은 30개가 넘는 IC로 컴플렉스를 만들고 잘 작동합니다. 소규모 컴플렉스로 시작하여 나중에 크기를 늘려 어떻게 작동하는지 확인하는 것이 좋습니다. 레몬은 물의 pH를 낮출 수 있으며, 예를 들어 미네랄을 첨가하여 각인 저장을 위해 물의 pH를 높이는 것이 전반적으로 더 좋습니다(단, 미네랄이 너무 많으면 몸에 좋지 않음). 더 긴 시간 동안 각인(반복 횟수 추가)하고 물을 자주 마심으로써 더 높은 효과를 얻을 수 있습니다. 기본적으로 좋은 품질의 물을 사용하고 각인하기 전에 흔들어야 하며 각인하기 전에 적외선과 자석에 노출시킬 수도 있습니다.