Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Hi Anton, some questions about Imprint IC: 1) Regarding the glass bottle, it has to be totally smooth, because there are glass bottles that have a relief on the bottom with letters and numbers, does it make any difference? 2) The glass bottle cap which the best material, can be cork, plastic or metal? 3) Although it is faster to shake the water bottle for at least 10 seconds, can we first put the water in a Shaker Vortex for 30 seconds or 1... 더 보기
Hi Anton, some questions about Imprint IC: 1) Regarding the glass bottle, it has to be totally smooth, because there are glass bottles that have a relief on the bottom with letters and numbers, does it make any difference? 2) The glass bottle cap which the best material, can be cork, plastic or metal? 3) Although it is faster to shake the water bottle for at least 10 seconds, can we first put the water in a Shaker Vortex for 30 seconds or 1 minute and then put the water in the glass bottle to make the Imprint on the IC Pad? Thanks
안녕하세요 Anton, Imprint IC에 관한 몇 가지 질문: 1) 유리병은 완전히 매끄러워야 하는데 유리병 바닥에 문자와 숫자가 양각으로 되어 있는 경우가 있는데 별 차이가 없나요? 2) 유리병 뚜껑은 코르크, 플라스틱, 금속 중 가장 좋은 재질인가요? 3) 물병을 10초 이상 흔드는 것이 더 빠르지만 먼저 Shaker Vortex에 물을 30초 또는 1분 동안 넣은 다음 유리병에 물을 넣어 IC 패드에 각인을 할 수 있습니까? ? 감사해요
Hi Jorge, 1) it is okay to have bottom with some numbers or if bottom curved. 2) bottle cap can be made from any material. 3) yes, you can shake water in a vortex device instead of shaking it by hand.
Anton SF Hi Anton, I bought two Circuit ic pad that arrived a few days ago, however I have been learning and watching the videos of how everything works. I tried one of the two and makes a small sound when I’m using for example some PEMF, except with the Schumann resonance that nothing is heard, I think it’s ok. When I removed the second one from the box, to try it, I saw that the upper part came out, it is detached, now I ask, it only has inside... 더 보기
Anton SF Hi Anton, I bought two Circuit ic pad that arrived a few days ago, however I have been learning and watching the videos of how everything works. I tried one of the two and makes a small sound when I’m using for example some PEMF, except with the Schumann resonance that nothing is heard, I think it’s ok. When I removed the second one from the box, to try it, I saw that the upper part came out, it is detached, now I ask, it only has inside the sound input adapter and the magnet? If the interior is just that, or would have to have something else between them? If it’s just that, what kind of glue can I use? Thanks.
Anton SF 안녕하세요, Anton. 저는 며칠 전에 도착한 두 개의 Circuit IC 패드를 구입했습니다. 그러나 저는 모든 것이 어떻게 작동하는지 배우고 비디오를 보고 있습니다. 둘 중 하나를 시도했는데 예를 들어 PEMF를 사용할 때 작은 소리가 납니다. 슈만 공명을 제외하고는 아무것도 들리지 않는데 괜찮은 것 같습니다. 두 번째 것을 상자에서 꺼내서 사용해 보려고 윗부분이 나온 걸 봤는데 분리가 됐는데 이제 물어보니 사운드 입력 어댑터 안에만 있고 자석만 있는 걸까요? 인테리어가 그저 그런 것이라면, 아니면 그들 사이에 뭔가 다른 것이 있어야 할까요? 그렇다면 어떤 종류의 접착제를 사용할 수 있습니까? 감사해요.
Anton SF 안녕하세요, Anton. 저는 며칠 전에 도착한 두 개의 Circuit IC 패드를 구입했습니다. 그러나 저는 모든 것이 어떻게 작동하는지 배우고 비디오를 보고 있습니다. 둘 중 하나를 시도했는데 예를 들어 PEMF를 사용할 때 작은 소리가 납니다. 슈만 공명을 제외하고는 아무것도 들리지 않는데 괜찮은 것 같습니다. 두 번째 것을 상자에서 꺼내서 사용해 보려고 윗부분이 나온 걸 봤는데 분리가 됐는데 이제 물어보니 사운드 입력 어댑터 안에만 있고 자석만 있는 걸까요? 인테리어가 그저 그런 것이라면, 아니면 그들 사이에 뭔가 다른 것이 있어야 할까요? 그렇다면 어떤 종류의 접착제를 사용할 수 있습니까? 감사해요.
Jorge Serras, sorry to hear about that, might be temperature fluctuations affected the glue. You can use any super glue. ICs include different frequencies and will sound different. Some of you will not be able to hear because our ears can usually only hear above 20 Hz and below 16kHz. Schuman IC is 7.83 Hz (low frequency).
Jorge Serras, sorry to hear about that, might be temperature fluctuations affected the glue. You can use any super glue. ICs include different frequencies and will sound different. Some of you will not be able to hear because our ears can usually only hear above 20 Hz and below 16kHz. Schuman IC is 7.83 Hz (low frequency).
Jorge Serras , 안타깝지만 온도 변화로 인해 접착제가 영향을 받았을 수도 있습니다. 어떤 슈퍼 접착제라도 사용할 수 있습니다. IC에는 서로 다른 주파수가 포함되어 있으며 소리도 다릅니다. 우리 귀는 일반적으로 20Hz 이상 16kHz 이하만 들을 수 있기 때문에 여러분 중 일부는 들을 수 없을 것입니다. 슈만 IC는 7.83Hz(저주파)입니다.
Jorge Serras , 안타깝지만 온도 변화로 인해 접착제가 영향을 받았을 수도 있습니다. 어떤 슈퍼 접착제라도 사용할 수 있습니다. IC에는 서로 다른 주파수가 포함되어 있으며 소리도 다릅니다. 우리 귀는 일반적으로 20Hz 이상 16kHz 이하만 들을 수 있기 때문에 여러분 중 일부는 들을 수 없을 것입니다. 슈만 IC는 7.83Hz(저주파)입니다.
Anton SF Thanks Anton, i tried it a while ago and makes a little sound, in the test, I think it’s working, in the meantime I’ll glue it. A new question is convenient to use mineral water that has fluoride or is it better to choose another? Thanks.
Anton SF Thanks Anton, i tried it a while ago and makes a little sound, in the test, I think it’s working, in the meantime I’ll glue it. A new question is convenient to use mineral water that has fluoride or is it better to choose another? Thanks.
Anton SF 고마워요 Anton, 얼마 전에 시도해 봤는데 소리가 조금 나네요. 테스트에서는 작동하는 것 같아요. 그동안 접착제로 붙일게요. 새로운 질문이 생겼습니다. 불소가 함유된 생수를 사용하는 것이 편리합니까, 아니면 다른 것을 선택하는 것이 더 낫습니까? 감사해요.
Anton SF 고마워요 Anton, 얼마 전에 시도해 봤는데 소리가 조금 나네요. 테스트에서는 작동하는 것 같아요. 그동안 접착제로 붙일게요. 새로운 질문이 생겼습니다. 불소가 함유된 생수를 사용하는 것이 편리합니까, 아니면 다른 것을 선택하는 것이 더 낫습니까? 감사해요.
Anton SF ich habe Umkehrosmose Wasser mit einem PH Wert von ca 6.5. Kann ich das so ohne Salz oder andere Zugaben verwenden wenn ich jeden Tag das Wasser frisch zubereite?
Anton SF ich habe Umkehrosmose Wasser mit einem PH Wert von ca 6.5. Kann ich das so ohne Salz oder andere Zugaben verwenden wenn ich jeden Tag das Wasser frisch zubereite?
thomas, we recommend drinking the same IC at least 3 times a day, therefore you would need to imprint it 3 times a day and drink after each imprint if you are using reverse osmosis water.
thomas, we recommend drinking the same IC at least 3 times a day, therefore you would need to imprint it 3 times a day and drink after each imprint if you are using reverse osmosis water.