Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Hello Anton…. Hope you are happy and well… 2 questions first is how long will water contain mprinted after it has been prepared? Second. Can you imprint through stainless steel drink container? Thank you! Margo
Hi Margo, regular mineral water would hold imprint for 3 days. If you use filtered water, then you need to drink it right after imprinting. You can use a glass or plastic container, but not a metal container, because it will shield the signal. You can imprint water in a glass bottle and then pour it into a stainless steel container for storage.
하이 마고, 일반 미네랄 워터는 3일 동안 각인을 유지합니다. 정수된 물을 사용할 경우 각인 직후에 마셔야 합니다. 유리 또는 플라스틱 용기를 사용할 수 있지만 금속 용기는 신호를 차폐하므로 사용할 수 없습니다. 유리병에 물을 각인한 다음 스테인리스 스틸 용기에 부어 보관할 수 있습니다.
Anton Sheikh-Fedorenko, hi ! Currently I am making all my imprints in stainless steel tumblers with the ic pad on top! Very close to the surface of the water with the pad shining into the tumbler. In addition to being very convenient, I've noticed that imprint effects seem to be... 더 보기
Anton Sheikh-Fedorenko, hi ! Currently I am making all my imprints in stainless steel tumblers with the ic pad on top! Very close to the surface of the water with the pad shining into the tumbler. In addition to being very convenient, I've noticed that imprint effects seem to be even more pronounced and longer lasting than in glass; for me anyways . Perhaps signal shielding from ambient emf noise during imprint gives higher fidelity? Also maybe signal is bouncing off the sides of container and multiplying signal water coincidence? Also it is very advantageous at night for sleep inducing ic's since the tumbler blocks the blue light. If this is a bad idea for any reason please lmk....😬
Anton Sheikh-Fedorenko, 안녕하세요! 현재 저는 ic 패드가 위에 있는 스테인리스 스틸 텀블러에 모든 인쇄물을 만들고 있습니다! 텀블러에 빛나는 패드와 함께 물 표면에 매우 가깝습니다. 매우 편리할 뿐만 아니라 각인 효과가 유리보다 훨씬 더 뚜렷하고 오래 지속되는 것으로 나타났습니다. 어쨌든 나를 위해 . 아마도 임프린트 중 주변 EMF 노이즈로부터 신호 차폐가... 더 보기
Anton Sheikh-Fedorenko, 안녕하세요! 현재 저는 ic 패드가 위에 있는 스테인리스 스틸 텀블러에 모든 인쇄물을 만들고 있습니다! 텀블러에 빛나는 패드와 함께 물 표면에 매우 가깝습니다. 매우 편리할 뿐만 아니라 각인 효과가 유리보다 훨씬 더 뚜렷하고 오래 지속되는 것으로 나타났습니다. 어쨌든 나를 위해 . 아마도 임프린트 중 주변 EMF 노이즈로부터 신호 차폐가 더 높은 충실도를 제공합니까? 또한 신호가 컨테이너의 측면에서 튀어 나와 신호 물의 일치를 곱하고 있습니까? 또한 텀블러가 블루라이트를 차단하기 때문에 밤에 ic's를 유도하는 수면에 매우 유리합니다. 어떤 이유로든 이것이 나쁜 생각이라면 lmk....😬
Hi Karin, it is okay to use filtered water and cool it with ice before imprinting. If your filter removes minerals from water (but usually jug filters that have activated carbon and ceramic filters do not remove minerals from the water), then you can add a pinch of sea or Himalayan salt to your water after filtering and then imprint it.
안녕하세요 Karin님, 정수된 물을 사용하고 각인하기 전에 얼음으로 식혀도 괜찮습니다. 필터가 물에서 미네랄을 제거하는 경우(그러나 일반적으로 활성탄 및 세라믹 필터가 있는 주전자 필터는 물에서 미네랄을 제거하지 않음), 필터링한 후 물에 바다 소금이나 히말라야 소금을 약간 넣고 각인할 수 있습니다.
Danke für die Antwort, ich sehe dass mein Filter aus der Kanne BWT sogar Mineral ( Magnesium) zuführt, also ist das gut und ich muss kein stilles Mineral kaufen, bin trotzdem am überlegen Minbiotics zu kaufen um zu verwenden👍 Danke auf alle Fälle Anton