I have the small IC pad Circuit. I hope that I did not inadvertently damage it. by using it on a metal topped table. There is a plastic runner between the table and the pad, but today I noticed there was a magnetic attraction between the pad and the table. Since it's not possible to know if the pad is working, do you think it is OK or did the magnetic attraction damage it?
顯示翻譯
Community
Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Wall post
Replies
LH
0
3 Comments
Anton SF
03月31日, 2019
Hi Lee, if cord still attached to Circuit IC Pad, then it should be fine, the metal table should have no bad influence on the IC Pad. There is actually a method to check whether the Circuit IC Pad is working - while IC Transfer (do not forget to put the volume at maximum) you can put IC Pad on a microphone of a smartphone, launch some voice recording app and record for 10 seconds, then playback and you should hear the ICs signal. That is possible... 查看更多
Hi Lee, if cord still attached to Circuit IC Pad, then it should be fine, the metal table should have no bad influence on the IC Pad. There is actually a method to check whether the Circuit IC Pad is working - while IC Transfer (do not forget to put the volume at maximum) you can put IC Pad on a microphone of a smartphone, launch some voice recording app and record for 10 seconds, then playback and you should hear the ICs signal. That is possible because the IC Pad emits electromagnetic (EM) signal and microphone can be influenced not only by sound waves but also by EM waves. This method may not well with any smartphone/table, e.g. we tried with iPad - did not work, seems iPad's microphone has an EM shield, it worked with Pixel 3. I will try to make a short video and email it to you. But still, I think your IC Pad should be fine.
顯示翻譯
已點讚
按讚
回覆
0
1 個回复
隱藏分支
LH
Lee Hager
03月31日, 2019
Anton Sheikh-Fedorenko, I tried the test that you recommended on an Android phone and just got a flat line and heard nothing. I don't know if this phone has an EM blocker or not and don't know how to check on that. We are very concerned that the pad is not working since we have diseases that need treatment. We had no idea that the metal table could be a problem and wonder if we need to purchase a new one or if we can exchange the one we have?
Anton Sheikh-Fedorenko, I tried the test that you recommended on an Android phone and just got a flat line and heard nothing. I don't know if this phone has an EM blocker or not and don't know how to check on that. We are very concerned that the pad is not working since we have diseases that need treatment. We had no idea that the metal table could be a problem and wonder if we need to purchase a new one or if we can exchange the one we have?
Anton Sheikh-Fedorenko, I tried the test that you recommended on an Android phone and just got a flat line and heard nothing. I don't know if this phone has an EM blocker or not and don't know how to check on that. We are very concerned that the pad is not working since we have diseases that need treatment. We had no idea that the metal table could be a problem and wonder if we need to purchase a new one or if we can exchange the one we have?
已點讚
按讚
回覆
0
1 個回复
隱藏分支
Anton SF
03月31日, 2019
Hi Lee, for your IC Pad it is important that a cord is connected and coil lines are not broken (they can be broken it somebody scratched them intensively with a knife, for example), then a signal will go through a coil and emit electromagnetic waves. As I mentioned yesterday I will prepare a short video and some other information on how you can check whether IC Pad is working. If your IC Pad was just laying on the metal sheet then it should be fine. I... 查看更多
Hi Lee, for your IC Pad it is important that a cord is connected and coil lines are not broken (they can be broken it somebody scratched them intensively with a knife, for example), then a signal will go through a coil and emit electromagnetic waves. As I mentioned yesterday I will prepare a short video and some other information on how you can check whether IC Pad is working. If your IC Pad was just laying on the metal sheet then it should be fine. I hope to create and send you more details and video later today. Thank you!
顯示翻譯
已點讚
按讚
回覆
0
0 個回复
隱藏分支
正在加載...
Wall post
Replies
LH
Thank you for your quick response. I will try the recording and see what happens. In the meantime, I am setting the pad on a pad of paper that appears to break the magnetic connection.
0
0 Comments
open modal
非常感謝，您的經驗已提交！
完成
請選擇語言
選擇