Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Steve, in general (it is applied to any IC), it is important is to drink IC water 2-3 times a day. This is because we need to periodically supply and influence the body with infoceuticals in order to cause an informational effect on the body. Soon we will publish updated instructions on preparing water with ICs. The new method makes it more convenient to follow "2-3 times a day" schedule.
스티브, 일반적으로 (모든 IC에 적용됨) 하루에 2-3 번 IC 물을 마시는 것이 중요합니다. 이는 신체에 정보 효과를주기 위해 주기적으로 정보 수술을 신체에 공급하고 영향을 미칠 필요가 있기 때문입니다. 곧 IC로 물을 준비하는 방법에 대한 업데이트 된 지침을 게시 할 것입니다. 새로운 방법은 "하루 2-3 회"일정을 따르는 것이 더 편리합니다.
I have a question about holographic stickers ... After I imprint info on sticker instead beeing put on body or whatever I put it on water bottle and so inform water in it? If so, how fast should this tranformation of info happen?
Hi Borut, you can do that and wait for at least one hour. But this method is less reliable than imprinting water directly with the device, as you have an additional mediator - sticker. Many years ago that how the project was started, people were imprinting compact disks (which also have layers or plastic, metal etc) and then exposing water on the disk. It worked but was less effective compared... 더 보기
Hi Borut, you can do that and wait for at least one hour. But this method is less reliable than imprinting water directly with the device, as you have an additional mediator - sticker. Many years ago that how the project was started, people were imprinting compact disks (which also have layers or plastic, metal etc) and then exposing water on the disk. It worked but was less effective compared to imprinting water directly. If you have GlowPad 3, which is pretty strong, you can also try applying Imprint ICs directly to the body.
보루트 님, 안녕하세요. 그렇게 하고 최소 1시간 정도 기다리시면 됩니다. 그러나 이 방법은 추가 중재자(스티커)가 있기 때문에 장치에 직접 물을 각인하는 것보다 신뢰성이 떨어집니다. 프로젝트가 시작된 수년 전, 사람들은 컴팩트 디스크(레이어나 플라스틱, 금속 등도 포함)를 각인한 다음 디스크에 물을 노출시켰습니다. 효과가 있었지만 물을 직접 각인하는 것에 비해 효율성이 떨어졌습니다. 꽤 강력한 GlowPad 3가 있다면 임프린트 IC를 본체에 직접 적용해 볼 수도 있습니다.
Anton SF Hi, I have Circuit IC Pad, did not want to buy old one (Pad2) and I also posses IC Hummer ... I'll buy Pad3 in future as is much easier to work with. You could also start to produce Holographic Coasters ;) (reagarding previous discussion :) ). I have another question, as watter transforms infos between bottles if placed together, waht is a 'safe' distance between them not... 더 보기
Anton SF Hi, I have Circuit IC Pad, did not want to buy old one (Pad2) and I also posses IC Hummer ... I'll buy Pad3 in future as is much easier to work with. You could also start to produce Holographic Coasters ;) (reagarding previous discussion :) ). I have another question, as watter transforms infos between bottles if placed together, waht is a 'safe' distance between them not that to happen, if you have let say some bottles of prepared different informed watter in fridge?
Anton SF 안녕하세요, 저는 Circuit IC Pad를 가지고 있는데 오래된 것(Pad2)을 사고 싶지 않았고 IC Hummer도 가지고 있습니다. 작업하기가 훨씬 쉽기 때문에 나중에 Pad3을 구입할 예정입니다. 홀로그램 컵받침 제작을 시작할 수도 있습니다. ;) (이전 논의에 관해 :)). 또 다른 질문이 있습니다. 물은 함께 놓으면 병 사이의 정보를 변환하므로, 냉장고에 준비된 서로 다른 물이 담긴 병을 말하면 병 사이의 '안전한' 거리는 일어나지 않을 것입니까?
image.png1.78메가바이트
Anton SF 안녕하세요, 저는 Circuit IC Pad를 가지고 있는데 오래된 것(Pad2)을 사고 싶지 않았고 IC Hummer도 가지고 있습니다. 작업하기가 훨씬 쉽기 때문에 나중에 Pad3을 구입할 예정입니다. 홀로그램 컵받침 제작을 시작할 수도 있습니다. ;) (이전 논의에 관해 :)). 또 다른 질문이 있습니다. 물은 함께 놓으면 병 사이의 정보를 변환하므로, 냉장고에 준비된 서로 다른 물이 담긴 병을 말하면 병 사이의 '안전한' 거리는 일어나지 않을 것입니까?
Borut Kuk, transfer from one bottle to another would mostly happen in case they are in the same magnetic field, or you shine a laser through both bottles. When storing in the fridge, you can keep 2-5 cm (1-2 inches) distance between bottles. For additional shielding EMF fabric would be helpful.
Borut Kuk, transfer from one bottle to another would mostly happen in case they are in the same magnetic field, or you shine a laser through both bottles. When storing in the fridge, you can keep 2-5 cm (1-2 inches) distance between bottles. For additional shielding EMF fabric would be helpful.
Borut Kuk , 한 병에서 다른 병으로 옮기는 경우는 대부분 동일한 자기장에 있거나 두 병을 통해 레이저를 비추는 경우에 발생합니다. 냉장고에 보관할 때는 병 사이에 2~5cm(1~2인치)의 거리를 유지하면 됩니다. 추가적인 차폐를 위해서는 EMF 패브릭이 도움이 될 것입니다.
Borut Kuk , 한 병에서 다른 병으로 옮기는 경우는 대부분 동일한 자기장에 있거나 두 병을 통해 레이저를 비추는 경우에 발생합니다. 냉장고에 보관할 때는 병 사이에 2~5cm(1~2인치)의 거리를 유지하면 됩니다. 추가적인 차폐를 위해서는 EMF 패브릭이 도움이 될 것입니다.