Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Hi Anton, my IC glow pad won't light up today, I've turned it on and off, pressed the button to get the red, blue, combo lights but when I start a transfer there are no lights (I usually have the red and blue combo lights chosen). Is it still transmitting? Wondering why the lights won't work (I've tried 2 different computers)? Thank you.
안톤 님, 안녕하세요. 오늘 내 IC 발광 패드가 켜지지 않습니다. 켰다가 껐다가 버튼을 눌러 빨간색, 파란색, 콤보 표시등을 켰는데 전송을 시작할 때 표시등이 없습니다(보통 빨간색과 파란색 콤보 조명이 선택됨). 아직도 전송 중인가요? 왜 조명이 작동하지 않는지 궁금하십니까(2대의 다른 컴퓨터를 사용해 보았습니다)? 감사합니다.
Update a couple hours later: now the lights are working. First time this has happened, so still curious if the Imprints were transmitting without the lights? And why that might happen?
Laurie Morse, if there are no lights during the transfer it means signal is not coming to the IC Pad or your selected Infrared light mode, you can learn more in the troubleshooting video on this page https://www.infopathy.com/en/tutorials/devices?show=glowing3&source=web
Laurie Morse, if there are no lights during the transfer it means signal is not coming to the IC Pad or your selected Infrared light mode, you can learn more in the troubleshooting video on this page https://www.infopathy.com/en/tutorials/devices?show=glowing3&source=web
Laurie Morse , 전송 중에 표시등이 없으면 신호가 IC 패드 또는 선택한 적외선 모드로 전달되지 않는다는 의미입니다. 이 페이지 https://www.infopathy.com/en/tutorials의 문제 해결 비디오에서 자세히 알아볼 수 있습니다. /devices?show=glowing3&source=웹
Laurie Morse , 전송 중에 표시등이 없으면 신호가 IC 패드 또는 선택한 적외선 모드로 전달되지 않는다는 의미입니다. 이 페이지 https://www.infopathy.com/en/tutorials의 문제 해결 비디오에서 자세히 알아볼 수 있습니다. /devices?show=glowing3&source=웹
Anton SF watched the video, thank you. This morning I charged some happy water and the lights were fine, then went to charge it again (didn't move the bottle or pad) just pressed transfer and no lights, nor is the on/white light pulsating. Seems like something is not working correctly?
Anton SF watched the video, thank you. This morning I charged some happy water and the lights were fine, then went to charge it again (didn't move the bottle or pad) just pressed transfer and no lights, nor is the on/white light pulsating. Seems like something is not working correctly?
Anton SF 영상 잘 봤습니다, 감사합니다. 오늘 아침에 해피 워터를 충전했는데 조명은 괜찮았고 다시 충전하러 갔습니다(병이나 패드를 움직이지 않았습니다). 전송 버튼을 눌렀는데 조명이 켜지지 않고 켜짐/백색 표시등도 깜박이지 않습니다. 뭔가 제대로 작동하지 않는 것 같나요?
Anton SF 영상 잘 봤습니다, 감사합니다. 오늘 아침에 해피 워터를 충전했는데 조명은 괜찮았고 다시 충전하러 갔습니다(병이나 패드를 움직이지 않았습니다). 전송 버튼을 눌렀는데 조명이 켜지지 않고 켜짐/백색 표시등도 깜박이지 않습니다. 뭔가 제대로 작동하지 않는 것 같나요?
Laurie Morse, please check that device is On, it will turn off automatically if not used for 15 minutes. Also, after transfer is started please make sure audio volume is set to maximum. Also you can try to reload the page.
Laurie Morse, please check that device is On, it will turn off automatically if not used for 15 minutes. Also, after transfer is started please make sure audio volume is set to maximum. Also you can try to reload the page.
I can't get any of my lights to stay on, l ckick the button the light just flashes on and off instantly.even after the transfer has been done from the PEMF so why will the lights not stay on when l want to place the unit over my Lung area?
Do I need a PEMF machine with this? Or could I just use my IC glow pad to imprint the water and then run the PEMF by using an ace wrap to attach to patient? Let's say kidney failure. Would it make sense to imprint the water with kidney rehab and then put the glow pad / on the patients back in between kidneys afterwards?
Do I need a PEMF machine with this? Or could I just use my IC glow pad to imprint the water and then run the PEMF by using an ace wrap to attach to patient? Let's say kidney failure. Would it make sense to imprint the water with kidney rehab and then put the glow pad / on the patients back in between kidneys afterwards?
last question....is it okay to sit next to the imprint while its working? I feel like my ears have pressure in them when its imprinting and I'm working nearby.
PEMF 기계가 필요합니까? 아니면 IC 글로우 패드를 사용하여 물을 각인한 다음 에이스 랩을 사용하여 환자에게 부착하여 PEMF를 실행할 수 있습니까? 신부전을 가정해 봅시다. 신장재활을 위해 물에 각인을 한 후 글로우 패드를 환자의 신장 사이에 다시 놓는 것이 합리적일까요?
마지막 질문....작동하는 동안 각인 옆에 앉아도 괜찮나요? 각인이 되고 근처에서 작업을 할 때 귀에 압력이 가해지는 것 같은 느낌이 듭니다.
Allison Laney , yes, of course! You can use your IC Glow Pad for both imprinting water with the 신장 재활 PEMF IC and applying PEMF therapy. Just imprint the water first, and then place the glow pad on the patient's back between the kidneys.
You can sit near device during imprinting. It is also possible to apply Imprint ICs directly to the body.
Allison Laney , yes, of course! You can use your IC Glow Pad for both imprinting water with the 신장 재활 PEMF IC and applying PEMF therapy. Just imprint the water first, and then place the glow pad on the patient's back between the kidneys.
You can sit near device during imprinting. It is also possible to apply Imprint ICs directly to the body.