Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Hi Anton, my IC glow pad won't light up today, I've turned it on and off, pressed the button to get the red, blue, combo lights but when I start a transfer there are no lights (I usually have the red and blue combo lights chosen). Is it still transmitting? Wondering why the lights won't work (I've tried 2 different computers)? Thank you.
Hola Anton, mi panel luminoso IC no se enciende hoy, lo encendรญ y apaguรฉ, presionรฉ el botรณn para encender las luces combinadas roja y azul, pero cuando inicio una transferencia no hay luces (generalmente tengo las luces combinadas rojas y azules elegidas). ยฟSigue transmitiendo? ยฟSe pregunta por quรฉ las luces no funcionan (he probado con 2 computadoras diferentes)? Gracias.
Update a couple hours later: now the lights are working. First time this has happened, so still curious if the Imprints were transmitting without the lights? And why that might happen?
Actualizaciรณn un par de horas mรกs tarde: ahora las luces estรกn funcionando. Es la primera vez que esto sucede, ยฟtodavรญa tienes curiosidad por saber si las Imprints se transmitรญan sin las luces? ยฟY por quรฉ podrรญa pasar eso?
Laurie Morse, if there are no lights during the transfer it means signal is not coming to the IC Pad or your selected Infrared light mode, you can learn more in the troubleshooting video on this page https://www.infopathy.com/en/tutorials/devices?show=glowing3&source=web
Laurie Morse, if there are no lights during the transfer it means signal is not coming to the IC Pad or your selected Infrared light mode, you can learn more in the troubleshooting video on this page https://www.infopathy.com/en/tutorials/devices?show=glowing3&source=web
Laurie Morse , si no hay luces durante la transferencia, significa que la seรฑal no llega al IC Pad o al modo de luz infrarroja seleccionado. Puede obtener mรกs informaciรณn en el video de soluciรณn de problemas en esta pรกgina https://www.infopathy.com/en/tutorials /dispositivos?show=glowing3&source=web
Laurie Morse , si no hay luces durante la transferencia, significa que la seรฑal no llega al IC Pad o al modo de luz infrarroja seleccionado. Puede obtener mรกs informaciรณn en el video de soluciรณn de problemas en esta pรกgina https://www.infopathy.com/en/tutorials /dispositivos?show=glowing3&source=web
Anton SFย watched the video, thank you. This morning I charged some happy water and the lights were fine, then went to charge it again (didn't move the bottle or pad) just pressed transfer and no lights, nor is the on/white light pulsating. Seems like something is not working correctly?
Anton SF watched the video, thank you. This morning I charged some happy water and the lights were fine, then went to charge it again (didn't move the bottle or pad) just pressed transfer and no lights, nor is the on/white light pulsating. Seems like something is not working correctly?
Anton SF Vi el video, gracias. Esta maรฑana carguรฉ un poco de agua feliz y las luces estaban bien, luego fui a cargarla nuevamente (no movรญ la botella ni la almohadilla), simplemente presionรฉ transferir y no hay luces, ni la luz blanca / encendida parpadea. ยฟParece que algo no funciona correctamente?
Anton SF Vi el video, gracias. Esta maรฑana carguรฉ un poco de agua feliz y las luces estaban bien, luego fui a cargarla nuevamente (no movรญ la botella ni la almohadilla), simplemente presionรฉ transferir y no hay luces, ni la luz blanca / encendida parpadea. ยฟParece que algo no funciona correctamente?
Laurie Morse, please check that device is On, it will turn off automatically if not used for 15 minutes. Also, after transfer is started please make sure audio volume is set to maximum. Also you can try to reload the page.ย
Laurie Morse, please check that device is On, it will turn off automatically if not used for 15 minutes. Also, after transfer is started please make sure audio volume is set to maximum. Also you can try to reload the page.
Laurie Morse , verifique que el dispositivo estรฉ encendido; se apagarรก automรกticamente si no se usa durante 15 minutos. Ademรกs, una vez iniciada la transferencia, asegรบrese de que el volumen de audio estรฉ configurado al mรกximo. Tambiรฉn puedes intentar recargar la pรกgina.
Laurie Morse , verifique que el dispositivo estรฉ encendido; se apagarรก automรกticamente si no se usa durante 15 minutos. Ademรกs, una vez iniciada la transferencia, asegรบrese de que el volumen de audio estรฉ configurado al mรกximo. Tambiรฉn puedes intentar recargar la pรกgina.
I can't get any of my lights to stay on, l ckick the button the light just flashes on and off instantly.even after the transfer has been done from the PEMF so why will the lights not stay on when l want to place the unit over my Lung area?
No puedo hacer que ninguna de mis luces permanezca encendida, presiono el botรณn y la luz simplemente parpadea y se apaga instantรกneamente. Incluso despuรฉs de que se haya realizado la transferencia desde el PEMF, ยฟpor quรฉ las luces no permanecen encendidas cuando quiero colocar las luces? unidad sobre mi รกrea de pulmรณn?
Do I need a PEMF machine with this? Or could I just use my IC glow pad to imprint the water and then run the PEMF by using an ace wrap to attach to patient? Let's say kidney failure. ย Would it make sense to imprint the water with kidney rehab and then put the glow pad / on the patients back in between kidneys afterwards?
Do I need a PEMF machine with this? Or could I just use my IC glow pad to imprint the water and then run the PEMF by using an ace wrap to attach to patient? Let's say kidney failure. Would it make sense to imprint the water with kidney rehab and then put the glow pad / on the patients back in between kidneys afterwards?
last question....is it okay to sit next to the imprint while its working? I feel like my ears have pressure in them when its imprinting and I'm working nearby.
ยฟNecesito una mรกquina PEMF con esto? ยฟO podrรญa simplemente usar mi almohadilla luminosa IC para imprimir el agua y luego ejecutar el PEMF usando una envoltura ace para sujetarlo al paciente? Digamos insuficiencia renal. ยฟTendrรญa sentido imprimir el agua con rehabilitaciรณn renal y luego volver a colocar la almohadilla luminosa en los pacientes entre los riรฑones?
รltima pregunta... ยฟEstรก bien sentarse junto a la impresiรณn mientras funciona? Siento que mis... Ver mรกs
ยฟNecesito una mรกquina PEMF con esto? ยฟO podrรญa simplemente usar mi almohadilla luminosa IC para imprimir el agua y luego ejecutar el PEMF usando una envoltura ace para sujetarlo al paciente? Digamos insuficiencia renal. ยฟTendrรญa sentido imprimir el agua con rehabilitaciรณn renal y luego volver a colocar la almohadilla luminosa en los pacientes entre los riรฑones?
รltima pregunta... ยฟEstรก bien sentarse junto a la impresiรณn mientras funciona? Siento que mis oรญdos tienen presiรณn cuando se imprime y estoy trabajando cerca.
Allison Laney , yes, of course! You can use your IC Glow Pad for both imprinting water with theย PEMF Rehabilitaciรณn renal ย IC and applying PEMF therapy. Just imprint the water first, and then place the glow pad on the patient's back between the kidneys.
You can sit near device during imprinting. It is also possible to apply Imprint ICs directly to the body.
Allison Laney , yes, of course! You can use your IC Glow Pad for both imprinting water with the PEMF Rehabilitaciรณn renal IC and applying PEMF therapy. Just imprint the water first, and then place the glow pad on the patient's back between the kidneys.
You can sit near device during imprinting. It is also possible to apply Imprint ICs directly to the body.
Allison Laney , ยกsรญ, claro! Puede utilizar su IC Glow Pad tanto para imprimir agua con el PEMF Rehabilitaciรณn renal IC y aplicaciรณn de terapia PEMF. Simplemente imprima el agua primero y luego coloque la almohadilla luminosa en la espalda del paciente, entre los riรฑones.
Puede sentarse cerca del dispositivo durante la impresiรณn. Tambiรฉn es posible aplicar Imprint IC directamente al cuerpo.
Allison Laney , ยกsรญ, claro! Puede utilizar su IC Glow Pad tanto para imprimir agua con el PEMF Rehabilitaciรณn renal IC y aplicaciรณn de terapia PEMF. Simplemente imprima el agua primero y luego coloque la almohadilla luminosa en la espalda del paciente, entre los riรฑones.
Puede sentarse cerca del dispositivo durante la impresiรณn. Tambiรฉn es posible aplicar Imprint IC directamente al cuerpo.