Hola Anton, a propรณsito de pegatinas hologrรกficas, estas preguntas:
1) En el Circuit IC Pad podemos poner todo el rollo de stickers, aunque salen fuera de la zona de influencia por ser mรกs anchos, para Imprint los ICs la mejor disposiciรณn es poner el rollo en horizontal, vertical o hacer un Sticker a la vez. ยฟun momento?
2) ยฟDeberรญamos primero limpiar las pegatinas haciendo funcionar el IC de resonancia Schumann... Ver mรกs
1) En el Circuit IC Pad podemos poner todo el rollo de stickers, aunque salen fuera de la zona de influencia por ser mรกs anchos, para Imprint los ICs la mejor disposiciรณn es poner el rollo en horizontal, vertical o hacer un Sticker a la vez. ยฟun momento?
2) ยฟDeberรญamos primero limpiar las pegatinas haciendo funcionar el IC de resonancia Schumann... Ver mรกs
1) You can do the whole roll. The roll can be a bit larger than the IC Pad, like 8cm (3 inches) in diameter.ย
2) No need to clean them before.
3) The recommendation for imprinting is the same as with water - the number is actually limited by the body's ability, not the carrier (sticker or water). For Imprint - we recommend up to 6 ICs, but... Ver mรกs
1) You can do the whole roll. The roll can be a bit larger than the IC Pad, like 8cm (3 inches) in diameter.
2) No need to clean them before.
3) The recommendation for imprinting is the same as with water - the number is actually limited by the body's ability, not the carrier (sticker or water). For Imprint - we recommend up to 6 ICs, but if larger works for you then you can do large. For PEMF, there is also no limit.
4) Yes, you can include 5G EMF protection IC with other ICs, there is no compatibility issue.
5) You can imprint stickers on demand when you need them.
1) Puedes hacer el rollo completo. El rollo puede ser un poco mรกs grande que el IC Pad, como 8 cm (3 pulgadas) de diรกmetro.
2) No es necesario limpiarlos antes.
3) La recomendaciรณn para la impresiรณn es la misma que con el agua: el nรบmero en realidad estรก limitado por la capacidad del cuerpo, no por el portador (pegatina o agua). Para Imprint, recomendamos hasta 6 circuitos... Ver mรกs
1) Puedes hacer el rollo completo. El rollo puede ser un poco mรกs grande que el IC Pad, como 8 cm (3 pulgadas) de diรกmetro.
2) No es necesario limpiarlos antes.
3) La recomendaciรณn para la impresiรณn es la misma que con el agua: el nรบmero en realidad estรก limitado por la capacidad del cuerpo, no por el portador (pegatina o agua). Para Imprint, recomendamos hasta 6 circuitos integrados, pero si uno mรกs grande le conviene, puede hacerlo en grande. Para PEMF, tampoco hay lรญmite.
4) Sรญ, puede incluir un circuito integrado de protecciรณn EMF 5G con otros circuitos integrados, no hay ningรบn problema de compatibilidad.
5) Puede imprimir pegatinas a pedido cuando las necesite.