How to Use Glowing IC Pad 3

Power On the Glowing IC Pad 3

To turn on the Glowing IC Pad 3, firmly press and hold the power button for 3 seconds. You will see a white light illuminate, indicating the device is on and ready for use.

Connect to Your Phone or Laptop/Computer

Wired Connection: Connect the audio cable to both the IC Pad and your device.
Wireless Connection: Go to your device’s Bluetooth settings and search for “Infopathy GlowPad”. Select it to pair. A confirmation with a blue light on the IC Pad signals a successful connection.

Selecting an IC

Visit our online catalog to browse a wide range of ICs tailored to your needs.

Using the Glowing IC Pad 3

For Water Imprinting: Place a water bottle or glass on the IC Pad.
For Direct Body Application: Hold the IC Pad against the area of your body you wish to target.

Press the ‘Start transfer’ button to start the process. If connected via audio cable, ensure your device’s volume is set to maximum.

Understanding Light Modes

Blue Light: Ideal for water imprinting.
Red Light: Best for direct body contact.
Infrared Light: Suitable for both applications and can be combined with blue and red for enhanced effects.

Battery Charging

A flashing red light every 5 seconds is a low battery indicator (below 10%). Recharge using a USB-C cable until the red light turns off, signifying a full charge.

Turning off the Glowing IC Pad 3

To power down the Glowing IC Pad 3, press and hold the power button until the light turns off. The device also automatically shuts down after 10 minutes of inactivity to conserve battery.

Frequently Asked Questions

What if GlowPad 3 is not glowing on MacBook/PC when connected with audio cable or Bluettoth?

  1. MacBook/iMac and Bluetooth connection.
After you connect GlowPad 3 to your Mac computer via Bluetooth and it is not glowing during transfer, please go to Settings -> Sound -> Output tab and select "Infopathy GlowPad". Also please make sure the audio volume is not zero.
Screenshot 2024-04-11 at 10.46.17 AM.png 464 KB

2. MacBook/iMac and Cable connection.

After you connect GlowPad 3 to your Mac computer via Audio cable (not USB cable) and it is not glowing during transfer, please go to Settings -> Sound -> Output tab and select "Headphones". Also please make sure the audio volume is set to Maximum:
Screenshot 2024-04-17 at 2.02.51 PM.png 410 KB

Does the Glowing IC Pad make noise during IC transfer?

No, the Glowing IC Pad is completely quiet.

Which light mode should I choose?

The Glowing IC Pad 3 is equipped with four versatile light modes, each designed to cater to specific needs and preferences:

  1. Blue + Red + Infrared Mode: This mode is optimal for enhanced imprinting processes, combining the benefits of blue, red, and infrared light to support intricate imprinting tasks with its multifaceted light spectrum.
  2. Red + Infrared Mode: Tailored for direct application on the body, this combination leverages the deep-penetrating properties of infrared light with the revitalizing energy of red light to offer a focused approach to bodily applications.
  3. Blue + Infrared Mode: Designed for regular strength imprinting, this setting merges the stimulating effects of blue light with the invisible power of infrared light, creating a balanced and effective imprinting experience.
  4. Infrared Only Mode: Given that infrared light is invisible to the naked eye, selecting this mode is ideal for discreet imprinting activities, such as charging water, in environments where darkness is preferred or necessary. This mode ensures a light-free environment, allowing for uninterrupted operation in dark settings.

Is it possible to use the Glowing IC Pad while it's charging?

Yes, you can use the Glowing IC Pad while it's charging.

Can I fully disable the Bluetooth module of the Glowing IC Pad 3?

Yes, you can fully power off the Bluetooth module of the IC Pad. While the device is turned on, hold the button for 10 seconds. You will notice the indicator light flashing red a few times, indicating that the module has been powered off, and the device will restart. To confirm that Bluetooth is fully disabled, you can go to the Bluetooth settings on your phone, and attempt to search for a new device, and the IC Pad will not appear there. To turn on the Bluetooth module again, simply follow the same steps: while the device is on, hold the button for 10 seconds.

What volume level should I set for my phone or laptop during transfer?

When using an audio cable, you need to set the volume to the maximum level. However, when using Bluetooth, you can set the volume to any level above zero.

Is it normal if some LEDs are not glowing?

Yes, it is normal. Infrared light is not visible to our eyes, so you can not see any light emitted from Infrared LEDs.

How long does it take to fully charge the Glowing IC Pad?

The Glowing IC Pad requires approximately 3 hours for a complete charge. Once fully charged, the red indicator light will turn off.

When is the best time to charge the battery for the Glowing IC Pad?

You can charge the battery at any time. However, if the indicator flashes red every 5 seconds, it means the battery is below 10% and should be charged soon.