How to Use IC Hummer
The IC Hummer is a wireless, wearable transfer device that can be used for all three ICs: Imprint (up to 2.0 L in 4 minutes), PEMF, and Audible.
The IC Hummer contains a rechargeable battery and is easy to use – just connect it to your computer/smartphone via Bluetooth and follow one of the transfer methods. The IC Hummer emits both electromagnetic and acoustic waves.
When using the IC Hummer, it is recommended to set the volume level of the laptop/smartphone up to 80% before starting the IC transfer.
You can use 1 IC Hummer, or for a stronger effect, you can use 2 IC Hummers at the same time.
Single IC Hummer Operation:
1. Hold the Power button (1) until you hear “Power on”.
2. Turn on Bluetooth on your computer/smartphone.
3. Search for “IC Hummer” and then pair the devices.
4. Once connected, choose IC and start the transfer.
Double IC Hummer Operation:
1. Turn on one IC Hummer device by holding the power button (1) until you hear “Power on”.
2. Turn on Bluetooth on your computer/smartphone.
3. Search for “IC Hummer” and then pair the devices.
4. Turn on second IC Hummer device by holding the power button (1) until you hear “Power on. IC Hummers will pair automatically with each other.
5. Once connected, choose ICs and start the transfer.
Charging IC Hummer:
To charge the IC Hummer, connect a USB cable to the Charging port (2) and any USB charger.