Infopathy

Groups

Community

App Testing

In this group, we will talk about Infopathy Android and iOS app.

Show infoCollaps info

Create discussion

Mention

IC or Complex

Posting

Wall post

Replies

Anton SF

about 2 years ago

Hello Everyone! Thank you for participating in the testing of our app. Here are the instructions for installation and usage:

Installation Instructions for iOS Users:

Follow this link: https://testflight.apple.com/join/y9KKvTDz
Install the TestFlight app, which enables you to install the beta version of the Infopathy app. If you asked for the code, please use this one: y9KKvTDz
If you are not able to enter that code, please follow this link https://testflight.apple.com/join/y9KKvTDz

... See more

22 Likes

243 Comments

Julie-Anne Cox

Nov 11, 2025

i had access to the testflight app for Infopathy and today I seem to be kicked out and cannot get back in because it says No accepting anymore beta users :( Can anyone help me?

Liked

0 replies

Hide branch

Jirapa Chung

Jul 31, 2024

Hi Anton,
I got your app testing. When I tried to download it on Google Play or use the public version,
it just showed the black screen, nothing happened. My phone is Samsung Galaxy Note 20Ultra.
Please advise.

Liked

2 replies

Hide branch

Josef Pieringer

Jan 16, 2025

App not available for this account
Your account hasn't yet been invited to participate in this app's internal testing program.

[email protected]

Danke !

Liked

1 reply

Hide branch

Load more comments...

Wall post

Replies

Delphine Lamotte

6 months ago

On the application you would have to force the phone to run in the background so that it remains open throughout the use of infopathy.
In fact, as I cannot set my Samsung screen to stay on for more than 10 minutes, it systematically cuts off Infopathy on 30-minute programs.
You then have to either tap the screen every ten minutes to keep it from turning off, or go back... See more

Show original

1 Likes

1 Comments

Anton SF

May 30, 2025

Delphine Lamotte, we currently working on a new player engine that should continue working when phone's screen is locked, with current player some phones stop playing because of energy optimisations. New player that should be released in about 1 month should solve this issue.

Liked

0 replies

Hide branch

Wall post

Replies

Josef Pieringer

9 months ago

Wenn das ICs Glowing Pad 3.0 upgegradet werden sollte,

eine Neuauflage erfährt, einen Nachfolger bekommt,

hätte ich mir folgendes gewünscht:

(so erste Überlegungen, … 😉 )

Das Bedienen des Glowing Pads soll so einfach wie möglich bleiben,
bzw. noch einfacher werden.

Man soll das Gerät jemanden
zur (ersten, anfänglichen) Anwendung übergeben können,

der keinerlei Verständnis für komplizierte Technik hat,

(Handy, Verkabelung, Bluetooth, Programm,…),

oder auch gesundheitlich sehr angeschlagen ist,

und... See more

Wenn das ICs Glowing Pad 3.0 upgegradet werden sollte,

eine Neuauflage erfährt, einen Nachfolger bekommt,

hätte ich mir folgendes gewünscht:

(so erste Überlegungen, … 😉 )

Das Bedienen des Glowing Pads soll so einfach wie möglich bleiben,
bzw. noch einfacher werden.

Man soll das Gerät jemanden
zur (ersten, anfänglichen) Anwendung übergeben können,

der keinerlei Verständnis für komplizierte Technik hat,

(Handy, Verkabelung, Bluetooth, Programm,…),

oder auch gesundheitlich sehr angeschlagen ist,

und nicht die notwendige Konzentration aufbringen kann,

um das Programm immer wieder über ein extra Gerät

selbst neu zu starten.

Und das reine Benutzen sollte mit 2 Minuten Einschulung möglich sein.

Das würde bedeuten,
dass man zusätzlich zu den derzeitigen Betriebsarten

(Übertragung des Audiosignal über Analogkabel oder über BlueTooth)

das gewünschte Programm und die Anzahl,
wie oft es abgespielt werden soll, und welche LEDs aktiv sein sollen

auch über Bluetooth vom Host (PC, Handy, Tablet, …)

vorab vollständig auf das Glowing Pad übertragen kann,

und am Glowing Pad wird das gleich gespeichert.

Vielleicht sollte man auch mehrere Programme

hintereinander übertragen können,

(Programmabfolge auf eine Gesamtprogramm zusammenfassen)
welche dann in genau dieser gleichen Reihenfolge abgespielt werden)

Und auch wenn man das Glowing Pad aus- und wieder ein-schaltet,

oder der Akku leer wurde,
soll das Programm trotzdem gespeichert bleiben.

Also eigentlich sehr ähnlich zu einem handelsüblichen MP3 Player.

Funktionen der Einschalttaste:

Taste 2 Sekunden gedrückt halten:

Gerät einschalten (wie bisher)

Taste kurz drücken:

abspielen des gespeicherten Programms

mit der gespeicherten Anzahl von Durchläufen.

Taste kurz drücken:

pausieren des gespeicherten Programms

Taste kurz drücken:

fortsetzen des gespeicherten Programms

Taste 4 Sekunden gedrückt halten:

Gerät ausschalten (wie bisher)

Wenn man das Programm unterbrechen,

und von vorne neu starten will,

Glowing Pad ausschalten und wieder einschalten.

Eventuell sollte man das gespeicherten Programm

auch über BlueTooth vom Host aus
starten, stoppen und löschen können,
und die LEDs an- und ab-wählen.

Wenn man ein neues Programm auf das Glowing Pad überträgt,

(Bluetooth Verbindung aufbauen, Übertragung starten)

soll das Glowing Pad ein eventuell gerade laufendes Programm

automatisch stoppen.

Das wären so meine Gedanken,

um den Glowing Pad Besitzern

erst Anwendungen an Familienmitgliedern, Verwandten,

Bekannten, Freunden zu erleichtern.

(ohne lange technische Erklärungen, Einschulungen)

Die Anleitung könnte dann folgendermaßen lauten:

Nimm das Glowing Pad, schalte es ein,

stell Dein Wasser drauf, drück auf Knopf,

und wenn es aufhört zu leuchten, ist es fertig,

und Du kannst es ausschalten.

oder:

Nimm das Glowing Pad, schalte es ein,

halte es an Deine Problemzone, drück auf Knopf,

und wenn es aufhört zu leuchten, ist es fertig,

und Du kannst es ausschalten.

Herzlichen Dank !

Liebe Grüße Josef

Show translation

If the ICs Glowing Pad 3.0 should be upgraded,

is reissued, gets a successor,

I would have liked the following:

(so first thoughts, … 😉 )

The operation of the Glowing Pad should remain as simple as possible,
or become even easier.

You should give the device to someone
to the (first, initial) application,

who has no understanding of complicated technology,

(mobile phone, cabling, Bluetooth, program,…),

or is in very... See more

If the ICs Glowing Pad 3.0 should be upgraded,

is reissued, gets a successor,

I would have liked the following:

(so first thoughts, … 😉 )

The operation of the Glowing Pad should remain as simple as possible,
or become even easier.

You should give the device to someone
to the (first, initial) application,

who has no understanding of complicated technology,

(mobile phone, cabling, Bluetooth, program,…),

or is in very poor health,

and cannot muster the necessary concentration,

to run the program again and again via an extra device

to restart yourself.

And just using it should be possible with 2 minutes of training.

That would mean
that in addition to the current operating modes

(Transmission of the audio signal via analog cable or via Bluetooth)

the desired program and the number,
how often it should be played and which LEDs should be active

also via Bluetooth from the host (PC, mobile phone, tablet, …)

can be transferred completely to the Glowing Pad in advance,

and it is saved immediately on the Glowing Pad.

Maybe you should also use several programs

can be transferred one after the other,

(Summarize program sequence into one overall program)
which are then played in exactly the same order)

And even if you turn the Glowing Pad off and on again,

or the battery was empty,
the program should still be saved.

So actually very similar to a standard MP3 player.

Power button functions:

Hold the button for 2 seconds:

Turn on the device (as before)

Press the button briefly:

play the saved program

with the stored number of runs.

Press the button briefly:

pause the saved program

Press the button briefly:

continue the saved program

Hold the button for 4 seconds:

Turn off the device (as before)

If you interrupt the program,

and want to start all over again,

Turn the Glowing Pad off and on again.

You may want to use the saved program

also via Bluetooth from the host
start, stop and delete,
and select and deselect the LEDs.

When you transfer a new program to the Glowing Pad,

(Establish Bluetooth connection, start transfer)

The Glowing Pad should be able to display a program that is currently running

stop automatically.

Those would be my thoughts,

to the Glowing Pad owners

first applications to family members, relatives,

To make things easier for acquaintances and friends.

(without long technical explanations, training)

The instructions could then be as follows:

Take the Glowing Pad, turn it on,

put your water on it, press the button,

and when it stops shining, it is finished,

and you can turn it off.

or:

Take the Glowing Pad, turn it on,

hold it to your problem area, press the button,

and when it stops shining, it is finished,

and you can turn it off.

Thank you very much!

Best regards, Josef

Show original

4 Likes

4 Comments

Anton SF

Mar 19, 2025

Josef Pieringer, thank you very much for your suggestions! We are already working on such device for over 2 year and hope to have it ready in 6-12 months or so. It will have memory for 10-20 ICs/Complexes and stored ICs can be used without phone or laptop - as standalone device. New ICs can be uploaded through the app. It will also have a small screen so you... See more

Liked

2 replies

Hide branch

Debby Woollacott

May 06, 2025

Anton SF You are the best 😇

Liked

0 replies

Hide branch

Jaqi

May 21, 2025

Anton SF are you planning to price that much higher than the glow pad and will it also have the lights? I have the IC circuit and am trying to decide, if you are going with the new upgrade to glowpad, I am wondering if I should buy the hummer or the current glow pad

Liked

1 reply

Hide branch

Anton SF

May 25, 2025

Jaqi , thank you for your interest! We are working on an improved version of GlowPad. Mainly it should be more energy efficient and will possible have replicable battery. Expected around end of 2025 - beginning 2026 if all goes well.
Device we discussed in this post will be ready around Q1-Q2 2026. The new device will be more feature-rich, with a higher price point, as it will also support... See more

Liked

0 replies

Hide branch

Wall post

Replies

GGaillac

7 months ago

Good morning,
What a CI for someone who always has a blocked nose without necessarily having a cold. It's therefore impossible to breathe through their nose! They have a dust mite allergy, but their nose is blocked even when they're not having attacks.
Thank you for your help /

Show original

1 Likes

2 Comments

Infopathy Team

May 22, 2025

GGallac, we suggest the following who deal with a combination of allergic and non-allergic rhinitis: Allergy Support

Designed to ease pollen-related allergies and support the sinuses and lungs. It's made with Japanese quail egg concentrate, known for its natural antihistamine properties.

Allergy Ease

A blend of herbal ingredients aimed at relieving common allergic rhinitis symptoms such as runny nose, sneezing, and itchy eyes. It includes traditional Chinese medicine herbs like... See more

Liked

0 replies

Hide branch

Jaqi

May 22, 2025

have you tried infrared for nasal application to reduce histamine production? I just got a swiss device for my child it was about USD 70 ish

Liked

0 replies

Hide branch