Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Hi Dorothy, thank you for your question! some people were adding borax (boron compound) to their water and it was fine. Liquid magnesium or any other mineral also should be fine. If you preparing 30-50 mL tinctures with IC saline (method 2), then to your glass of water you can first add boron, for example, and then drops of IC saline. If you using "method 1" then you can add minerals to your water first, then shake it and transfer ICs to it. If... Voir plusHi Dorothy, thank you for your question! some people were adding borax (boron compound) to their water and it was fine. Liquid magnesium or any other mineral also should be fine. If you preparing 30-50 mL tinctures with IC saline (method 2), then to your glass of water you can first add boron, for example, and then drops of IC saline. If you using "method 1" then you can add minerals to your water first, then shake it and transfer ICs to it. If you have any other questions, please let me know! Thank you!
Salut Dorothy, merci pour votre question! certaines personnes ajoutaient du borax (composé de bore) à leur eau et c'était bien. Le magnésium liquide ou tout autre minéral devrait également convenir. Si vous préparez des teintures de 30 à 50 ml avec une solution saline IC (méthode 2), vous pouvez d'abord ajouter du bore, par exemple, à votre verre d'eau, puis des gouttes de solution saline IC. Si vous utilisez la «méthode 1», vous pouvez d'abord... Voir plusSalut Dorothy, merci pour votre question! certaines personnes ajoutaient du borax (composé de bore) à leur eau et c'était bien. Le magnésium liquide ou tout autre minéral devrait également convenir. Si vous préparez des teintures de 30 à 50 ml avec une solution saline IC (méthode 2), vous pouvez d'abord ajouter du bore, par exemple, à votre verre d'eau, puis des gouttes de solution saline IC. Si vous utilisez la «méthode 1», vous pouvez d'abord ajouter des minéraux à votre eau, puis la secouer et y transférer des circuits intégrés. Si vous avez d'autres questions, faites-le moi savoir! Je vous remercie!
Hi
I’m helping my son with his science fair project. How does one measure the signals (electromagnetic spectrum) that are in the treated water Vs. regular tap or filtered water?
Salut, j'aide mon fils avec son projet d'expo-sciences. Comment mesurer les signaux (spectre électromagnétique) qui se trouvent dans l'eau traitée Vs. eau du robinet ou filtrée?
Hi Jennifer, thank you for your question! To measure the signal from the water with diluted substance or then IC we put sample of water in the electromagnetic coil, amplify whatever signal we can detect and then record it. After that, we can perform spectral analysis. But usually, the spectrum just looks like white noise and specificity is hidden inside noise modulations. To study the specific effect of treated water better to use biological... Voir plus
Hi Jennifer, thank you for your question! To measure the signal from the water with diluted substance or then IC we put sample of water in the electromagnetic coil, amplify whatever signal we can detect and then record it. After that, we can perform spectral analysis. But usually, the spectrum just looks like white noise and specificity is hidden inside noise modulations. To study the specific effect of treated water better to use biological experiments, for example with yeasts, mice, etc.
I would also recommend watching the movie with Luc Montagnier (you can find it among the first posts at the IC Platform), I think they have a good demonstration fo the process. Please, let me know if you have any other questions or need further clarification. Thank you!
Salut Jennifer, merci pour votre question! Pour mesurer le signal de l'eau avec une substance diluée ou ensuite IC, nous mettons un échantillon d'eau dans la bobine électromagnétique, amplifions le signal que nous pouvons détecter et l'enregistrons. Après cela, nous pouvons effectuer une analyse spectrale. Mais généralement, le spectre ressemble à du bruit blanc et la spécificité est cachée à l'intérieur des modulations de bruit. Pour étudier... Voir plus
Salut Jennifer, merci pour votre question! Pour mesurer le signal de l'eau avec une substance diluée ou ensuite IC, nous mettons un échantillon d'eau dans la bobine électromagnétique, amplifions le signal que nous pouvons détecter et l'enregistrons. Après cela, nous pouvons effectuer une analyse spectrale. Mais généralement, le spectre ressemble à du bruit blanc et la spécificité est cachée à l'intérieur des modulations de bruit. Pour étudier l'effet spécifique de l'eau traitée, mieux utiliser des expériences biologiques, par exemple avec des levures, des souris, etc. ils ont une bonne démonstration du processus. S'il vous plaît, faites-moi savoir si vous avez d'autres questions ou avez besoin de plus amples éclaircissements. Je vous remercie!
Hi Anton, I connect my glowing IC pad to my laptop, to the headphone jack - so, I don't hear anything, but the pad is glowing until transfer is complete. When I switch audio output on my laptop to my wireless bluetooth speaker, I can hear the transfer but the pad stops glowing. My question: As long as the pad glows during transfer, do I need to be concerned with not hearing it? Thank you.
Salut Anton, je connecte mon pad IC lumineux à mon ordinateur portable, à la prise casque - donc, je n'entends rien, mais le pad brille jusqu'à ce que le transfert soit terminé. Lorsque je change la sortie audio de mon ordinateur portable sur mon haut-parleur Bluetooth sans fil, je peux entendre le transfert mais le pad cesse de briller. Ma question: tant que le pad brille pendant le transfert, dois-je m'inquiéter de ne pas l'entendre? Je vous... Voir plus
Salut Anton, je connecte mon pad IC lumineux à mon ordinateur portable, à la prise casque - donc, je n'entends rien, mais le pad brille jusqu'à ce que le transfert soit terminé. Lorsque je change la sortie audio de mon ordinateur portable sur mon haut-parleur Bluetooth sans fil, je peux entendre le transfert mais le pad cesse de briller. Ma question: tant que le pad brille pendant le transfert, dois-je m'inquiéter de ne pas l'entendre? Je vous remercie.
Hi Monica, thank you for your question! When you turn on Bluetooth speaker then the signal going to that speaker, not IC Pad. Glowing IC Pad should glow during the transfer and you should not hear the sound, otherwise there is no signal comming to IC Pad. IC Pad emmits electromagnetic wave, not acoustic.
Salut Monica, merci pour ta question! Lorsque vous allumez le haut-parleur Bluetooth, le signal va à ce haut-parleur, pas à l'IC Pad. Le pad IC rougeoyant doit briller pendant le transfert et vous ne devez pas entendre le son, sinon aucun signal ne parvient à l'IC Pad. IC Pad émet des ondes électromagnétiques, pas acoustiques.